Troubleshooting Air Lift WirelessONE Compressor Not Filling Air Bags
Updated 02/27/2025 | Published 02/25/2025
Question:
Wirelessone compressor will not inflate, comes on for a second and turns off. A few minutes later it does the same thing. Tried various PSI attempts without change. Worked fine last fall. Checked all wire connections and nothing loose. Filled bags with third leg of air line using external compressor and bags hold air with no leaks and when a lower pressure is selected with remote the bags deflate properly. Any suggestions? Thanks
asked by: Matt M
Expert Reply:
Hey Matt, thanks for reaching out!
It sounds like the compressor from your Air Lift WirelessONE # AL25980 is faulty and that it will need to be replaced. Either the motor is very weak, or the internal check valve is seized and does not allow pressure to enter the bags.
This kit has a 2-year limited warranty so if you're still within that time period I recommend reaching out to Air Lift directly about this via their warranty link: https://www.airliftcompany.com/support/warranty/submit-claim
Let me know how everything plays out!
Product Page this Question was Asked From
Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - Single Path
- Air Bag Compressor Kit
- Smartphone App
- Wireless Remote
- Single Path
- Digital Display
- No Tank
- Light Duty
- Air Lift
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Best Air Bag Suspension (2023)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Best Air Bag Kit For 2001 Ford F250 With B&W Gooseneck Hitch In Bed
- Q&A: Will Air Lift Air Bag Kit Fit a 2024 Ford Bronco Black Diamond with the Sasquatch Package
- Q&A: How Much Travel will I Lose in My Rear Suspension with Air Lift Air Bags Installed 2025 Tacoma?
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Q&A: Comparing The Air Lift WirelessONE Compressor System # AL25980EZ And # AL25980
- Q&A: What Air Lift Spacer to Use with 3" Lifted 2017 Toyota Tacoma
- Q&A: Recommended Air Springs for a 2016 Ford F-250 With a B&W Turnoverball Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Mount a Truck Bed Camper
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Stability Control for Heavy Duty Vehicles
Matt M.
2/27/2025
When I wired in an on/off switch to the negative wire going to the battery, I miss identified the on and off. Evidently the unit still has a ground when the switch is off because it functioned as described above, intermittently but would not inflate. When I turned the switch on (thought was off) unit functioned correctly, inflated and deflated without flaw. Thanks anyway.