Shear Strength Capacity Of The Weigh Safe Hitch Pin Lock # WS54CR (WS05)

Question

Question:

In reference to the Weigh Safe Hitch w/ Built-In Scale for 2.5inch Hitch - 6inch /7inch Rise - 22K - Steel WS88RR. Can you tell me what locking hitch pin comes with this Brand/Part Number and the shear strength of the pin?

asked by: JD B

0

Expert Reply:

Hey JD,

The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch # WS88RR uses hitch pic lock # WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

expert reply by: Kevin C

0

Answer 1

Hey Carl! How much does the Weigh Safe weigh? With all of the parts put together the #WS88RR weighs 35-1/2 lbs. If you need anything else don't hesitate to reach out in the comments below.

view full answer...

Answer 2

So long as your F-250 has a 2-1/2" receiver then the B&W Tow & Stow 2-Ball Mount item #BWTS20037B will definitely work with your truck. This double ball mount has a 7,500 lbs capacity with the 2" ball or a 18,000 lbs capacity with…

view full answer...

Answer 3

If your running lights are not working with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 but your turn signals are, the issue is likely the diodes. If the wires are not properly routed with the diodes, or there is some issue…

view full answer...

Answer 4

I do have an option for you but the Reducer Sleeve for Super Titan Hitch Receivers part #38735 does not work with any of the Ford OEM 3" Hitches. Instead, I recommend the Buyers Products 3" to 2" Receiver Tube Adapter part #337RTA302…

view full answer...

Answer 5

Yes, due to how the BAKflip MX4 #BAK48330 you have on your 2022 Ford F-250 short bed installs the only ladder rack that's going to work is the Adarac Pro Series part #A4000952 which installs through the stake pockets and has vertical uprights…

view full answer...

Answer 6

Since the Westin HDX Headache Rack #57-8005 installs through the top of the bed rails it would allow a tonneau to fit between it as long as the tonneau cover attaches to the insides of the bed rails like the #TX569101, which fits your truck if it was…

view full answer...

Answer 7

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

view full answer...

Answer 8

No, the #14125A bearing has different applications than a #15123 bearing. The outer diameters are different. Both are readily available bearings. If you have a 15123 bearing then you would need that same bearing as a replacement. If you can provide…

view full answer...

Answer 9

Yes, the Timbren Suspension Enhancement System - Severe Service #TGMRTT35D will fit your 2022 GMC Sierra 3500. This system has an 8,000-lbs capacity that will increase stability, reduce rear sag, and will extend the life of your suspension. Attached…

view full answer...

Answer 10

In regards to a 2018 Ford F-350 DRW, the Rock Tamers Heavy-Duty, Adjustable Mud Flap System part #ERT00110 may reduce your turning clearance. I took a look at some of the reviews for this product from those towing a fifth wheel trailer and some…

view full answer...

Answer 11

The Roadmaster Trailer Hitch Locks #RM-316 you were looking at will lock the Roadmaster High-Low Adapter to your 2021 Jayco Class A's trailer hitch receiver, and the Roadmaster Nighthawk All-Terrain #RM-676 to the adapter, but will not lock the…

view full answer...

Shear Strength Capacity Of The Weigh Safe Hitch Pin Lock # WS54CR (WS05)

Product Page this Question was Asked From

Continue Researching