Replacement Grease Seal for 1976 Apache Ramada Pop Up Camper
Updated 04/02/2024 | Published 04/01/2024 >
Products Featured in This Question
Question:
I have a 1976 Apache Ramada pop up camper in need of Wheel seal. Only have the outer hub available to measure. Seal OD is just under 2.
asked by: Ken H
Expert Reply:
More information will be required to find the right grease seal. I would also use a digital caliper like # PTW80157 to get a precise measurement. To find the inner diameter of the grease seal you can measure the spindle where the seal sits. See the diagram below. Once you have the inner and outer diameter you can use the link below too all of our seals to filter down and find the right replacement assuming one is available.
Since the trailer is from 1976 it is highly likely the seal is obsolete and no longer made. If you can't find a replacement your only option would be to upgrade the axle so it uses a modern bearing and seal combination. To find a replacement axle you will need the capacity as well as the length which is the hub face to hub face measurement.

Product Page this Question was Asked From
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Troubleshooting Leaf Spring Coming In Contact With Brake Mounting Flange Bolt
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is the difference between 10-36 grease seal and GS-2250DL grease seal?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Recommended Grease Seals w/ a 2.250" ID and a 3.376" OD
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Bearing Kit for Dexter Axle on 2021 Grand Design Momentum 351M