Can A Pintle Hitch Adapter Be Added To A B&W Tow & Stow Ball Mount

Question

Question:

Is a pintle hitch adapter available for this hitch?

asked by: Harold

0

Expert Reply:

There isn't a way to add-on a pintle adapter to the B&W Tow & Stow Ball Mount # BWTS20040B, but B&W does offer a pintle hitch specific Tow & Stow ball mount for a 2-1/2" hitch with a 2" ball # BWTS20055 and a 2-1/2" ball # BWTS20056

expert reply by: Kevin C

0

Answer 1

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 4

Hi Mike! Do you want a completely hidden hitch or one where only the receiver is visible? The Curt #C64NR you looked at has a concealed cross tube so you will only see the receiver hanging down at the rear. The Hidden Hitch by Draw-Tite #DT76GR will…

view full answer...

Answer 5

Hey Mike, thanks for reaching out! It sounds like your 2025 Toyota Sienna doesn't have any wiring at the back so you'll need to install the T-One Wiring Harness #TK69FR along with the Universal Wiring Kit #ETBC7. This will give you all of the…

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

view full answer...

Answer 8

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 9

To add a hitch to your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity…

view full answer...

Answer 10

I would be happy to help! The Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End #HM40920 would only fit your 2010 Chevrolet Express Van 3500 if it has the factory towing package with a factory 7-way…

view full answer...

Answer 11

Hey Zach, to convert the 4-way of your 2017 Toyota Highlander to a 7-way and install a brake controller requires the adapter part #ETBC7. This comes with everything needed to make the conversion as well as wire in a brake controller. If your current…

view full answer...

Can A Pintle Hitch Adapter Be Added To A B&W Tow & Stow Ball Mount

Product Page this Question was Asked From

Continue Researching