Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Question

Question:

I have an older set of square crossbars from Inno and I'd like to use them to get a roof rack on my 2023 Traverse with raised rails. What other parts do I need?

asked by: Kristen

0

Expert Reply:

The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts:

- 54" Square Crossbars # INB137
- Inno Feet # INFR

As long as your crossbars are at least 54" you just need the feet and you're good to go!

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi Rene, So we do have one option for a load range D 185/80R13 tire and 5-lug wheel for your Rockwood A122S camper, which is a tire from Kenda: - Karrier ST185/80R13 Radial Trailer Tire with 13" Aluminum Wheel #KE33JR The Karrier tire on the…

view full answer...

Answer 4

Hey Jay, spec-wise the two tires are exactly the same and are even made by same company. Only real difference is a slightly different tread pattern so I would go with the better priced part #KE68KV all day.

view full answer...

Answer 5

Hey Jay, we actually sell replacement hardware for all of the hitches we sell with the part #RHK. On the product page you would just need to enter the hitch part number and we'll get you out the hardware that you need. Do you have either of those…

view full answer...

Answer 6

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 7

To install an Inno square bar roof rack on your 2018 Ford Edge you simply need part numbers #INB137, #INSUT, and #INK676.

view full answer...

Answer 8

I'm glad you like our site. We work hard to make it easy to use. If I were choosing between Yakima and Rhino-Rack roof racks I would choose Rhino-Rack. The reason for this is because first, the Rhino-Rack roof racks tend to cost less, and second,…

view full answer...

Answer 9

I really like the WeatherTech Mud Flaps part #WT110007-120007 that fits your 2007 Dodge Ram 1500 as it's custom fit so there's no drilling involved and they look like really nice as well.

view full answer...

Answer 10

The Buyers Products Mud Flaps #337B1018LSP are considered a universal fit and so long as you have enough room to mount them, they will fit on your 2019 Chevy Blazer. The mud flaps are 10" wide x 18" tall x 1/4" thick so you would need…

view full answer...

Answer 11

A two door vehicle is considered a coupe whereas a 4 door is a sedan. Since you have a 2 door vehicle that means you have a coupe which we do have roof rack fits for. The INNO Square Bar Roof rack part #INB137, #INSUT, and #INK683 is a confirmed fit…

view full answer...

Answer 12

There is not currently a Thule roof rack for your 2016 Honda Civic Coupe. My recommendation that is confirmed to fit your vehicle is the Inno Aero Crossbars - Aluminum - Black - 51" Long - Qty 2 #INXB130-2, Inno Through Feet for Aero Crossbars -…

view full answer...

Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Product Page this Question was Asked From

Continue Researching