Is There A Weight Distribution Hitch Compatible w/McHitch On Obi Dweller 13 Pulled By 2022 Gladiator

Updated 06/14/2023 | Published 06/12/2023

Products Featured in This Question

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW

(176)

$525.00

Tuson Trailer Sway Control System - Electronic - Up to 4 Axles

(43)

$466.46

Firestone Air Command Standard Duty Air Compressor - Smartphone App Only - Single Path

(330)

$452.80

Firestone Coil-Rite Air Helper Springs - Rear Axle

(670)

$158.63

Question:

I have a McHitch on my Obi Dweller 13, towed by my Jeep Gladiator Rubincon. Will this WDH work Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW Item # FA94-00-0800

asked by: John C

Expert Reply:

With the McHitch on your Obi Dweller 13 I have a couple recommendations since you will not be able to use a traditional weight distribution hitch. The McHitch changes the pivot point from the ball to the u-joint so it will not work properly with any current weight distribution hitch. Instead you can mount Firestone Coil-Rite Air Helper Springs # F29ZR on your 2022 Jeep Gladiator. This will allow you to take much of the rear end sag out of your rear suspension. You can use the Air Command Compressor System # F2610 to control the air pressure in your springs from your smartphone using the Ride-Rite app.

To reduce sway you can add the Tuson Asymmetric Sway Control # 335TSC-1000. This uses the electric trailer brakes to reduce sway. It uses a sensor mounted on the trailer to detect motion and applies the brakes to either the left or right side as needed to reduce trailer sway.

expert reply by: Bud M