Dimensions of the Fold-Down Gooseneck Trailer Hitch

Question

Question:

What are the plate outside measurements?

asked by: Steve R

0

Expert Reply:

The plate of the Fold-Down Gooseneck Trailer Hitch item # 8339-4449 is 12" by 14-1/2". The whole kit weighs 101 lbs. I have linked a diagram below.

If you would like for me to find the correct one for you all I would need to know is your vehicles year, make, and model.

expert reply by: Jerred H

0

Draw-Tite Dimensions
(click to enlarge)

Answer 1

The Curt Flat Plate Gooseneck #C65500 is a multi-fit application that can be used on a cab and chassis truck. Typically, the plate would be placed on top of the flat bed over the rear axle. The Universal Rail Kit, part #C61502 can be used to provide…

view full answer...

Answer 2

Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.

view full answer...

Answer 3

The B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1111 referenced in your question, which is confirmed to fit your 2013 Ford F-350, features brackets that mount to the outsides of the frame rails on the truck. As long as your air bags…

view full answer...

Answer 4

Actually, you can use the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item #BWGNRK1111 even with the Air Lift air bags installed on your 2011 Ford F-250. The upper brackets for the air bags mount on…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 8

Hey Justin, so I checked with B and W and they only have fits that run up to 2024 BUT since we know they 2024 and 2025 trucks are unchanged in terms of gooseneck hitches we know the Turnoverball part #BWGNRK1020 is a fit and will work great.

view full answer...

Answer 9

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

view full answer...

Answer 10

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Dimensions of the Fold-Down Gooseneck Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching