How To Choose Correct Replacement 28-1/2" Long Leaf Springs for a Trailer
Published 12/01/2022 >
Question:
HELLO I HAVE A TRAILER THAT HAS 28 1/2inch EYE TO EYE LEAF SPRINGS ON IT THEY NEED TO BE CHANGED BUT I CAN NOT FIND ANY THAT ARE EVEN CLOSE TO THAT SIZE . CAN THEY BE REPLACE WITH A SMALLER SIZE CLOSEST ONES I CAN FIND AROUND ARE 26 3/4inch .
asked by: Brian B
Expert Reply:
In order to find the correct replacement leaf spring for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different thicknesses. Once you have all this info you can choose the correct replacement from the list below. The springs should be replaced in pairs as well. The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles part # e97SR are the closest option we offer as hey measures 27" long eye to eye.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 27 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 3 leaf slipper spring
- Search Results: trailer leaf springs
- Search Results: slipper springs
- Search Results: bushings
- Shop: Tie Down Swivel Bolster Bracket for Boat Bunk Boards - 12" Long - Qty 1
- Search Results: 3 leaf trailer leaf springs
- Search Results: rubber bushing
- Search Results: brackets
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: Suspension Bushing - Nylon
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: How to Wire Reverse Lights on a Trailer with a 4-Way Trailer Connector
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Q&A: Does The Amount Of Leaves On A Trailer Leaf Spring Matter?
- Q&A: Slipper Springs and Slipper Bracket for a 28.5 Bolt to Bolt Trailer Mount
- Q&A: Determining Correct Length Replacement Leaf Spring

