Troubleshooting No Power To 7-Way On A 2017 Ram 1500
Question:
4 pin nor 7 pin. I have removed and replaced F29 fuse. As I was in the fuse box I pressed down on a number of fuses that seemed to go in a bit further. Still no power to either trailer connector. Should be no reason for a broken wire, and I cant see one. what else should I trouble shoot?
asked by: Rick W
Expert Reply:
Another thing you can check on your 2017 Dodge Ram 1500's 7-way is the physical connector. You're going to want to ensure that there is no corrosion or that may be causing a malfunction. You're going to want to make sure that the ground wires are all properly grounded and that they are free from corrosion and there are no breaks in the wire.
You're also going to want to make sure that the wires inside the receptacle are not damaged in any way. If all your wiring is good to go, then you'll just want to replace the entire plug with the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933.
I also recommend you try and test the wiring behind the 7-way with a circuit tester # PTW2993 to ensure that you are even receiving power to the connector.
Attached is a product overview video for you to check out as well.
Products Referenced in This Question
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Round - Blade
- Plug and Lead
- Plug-In
- Pollak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: reflector tape
- Video: Detailed Breakdown of the Shackle Bolt with Locknut For Double-Eye Springs
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Q&A: Is a Damaged Spindle Safe to Use If Hub Fits It
- Q&A: Length Of BT8 Spindle Used With etrailer Easy Grease Trailer Idler Hub Assembly AKIHUB-440-2-EZ-1K
- Shop: Shackle Strap - 2-3/4" Long
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Shop: 7" Long White/ 11" Long Red Conspicuity Reflective Tape - (8) 18" Strips
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer leaf springs
- Video: Measuring To Choose The Right Trailer Axle
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Shop: Trailer Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer suspension parts
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: equalizer
- Shop: Suspension Enhancement
- Search Results: trailer hitch
on Custom Fit Vehicle Wiring
