Correct Hub Bearing Kit for Trailer with 1-1/16" Inner Diameter Bearing
Question:
Looking for bearing and seal replacements.
asked by: Colin
0
Expert Reply:
If both the inner and outer bearings measure 1.063" then you'll need the Hub Bearing Kit part # BK1-150. If the inner bearing measures 1.378" and the outer bearing measures 1.063" then you'll need the Hub Bearing Kit part # BK2-100. Please note, bearings should be measured with a digital caliper to the nearest thousandth of an inch. It sounds like you need the part # BK1-150 based on the bearing and grease seal.
expert reply by:
Conner L
0
Correct Hub Bearing Kit for Trailer with 1-1/16" Inner Diameter Bearing
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Seal Comes With The DX87UR Bearing Kit
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Bearing Kit For 2021 Keystone Cougar With Dexter 4,400 lb Axle 134267232030
- Q&A: Replacement Coupler, Bearings and Hubs for a Detail K2 Utility Trailer