Does the Ground Wire On the 7-Way Need to Run to the Battery
Question:
If you run a 10 ga wire to the positive post do you also need to run a wire from the negative pin to the negative post on the battery
asked by: David
Helpful Expert Reply:
In regards to wiring a seven way trailer connector, the twelve volt power wire or otherwise known as the battery charge line circuit will need to be run from the trailer connector to the positive terminal of the battery. The ground wire circuit from the trailer connector does not need to be run to the negative battery terminal, it can just be ground to the frame or body. I recommend the 7-Way Install Kit part # ETBC7 which comes with everything you need. The duplex wire has two ten gauge wires, one will run to the battery and the other to the brake controller in the vehicle acting as the brake output wire, not the ground.

Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Wireless Brake Controller - Curt Echo vs Tekonsha Prodigy RF
- Q&A: 2022 Toyota Highlander With No tow Package Trying To Connect To Tekonsha Power Module 7 way
- Q&A: Where Do the Wires on the Universal Install Kit for Trailer Brake Controllers Get Installed?
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Shop: Tekonsha Trailer Breakaway Kit with 5 Ah Battery and Clamp On Case - Top Load
- Shop: Hopkins Engager Trailer Breakaway Kit w/ Charger, LED Tester, and 5 Ah Battery - Side Load
- Shop: Hopkins Engager Trailer Breakaway Kit w/ Charger, LED Tester, Hardware, and 5 Ah Battery - Top Load
- Search Results: etb7
- Q&A: Reverse Light PIn on a 7-Way Trailer Connector
- Q&A: What Circuit Does Center Pin of 7-Way Trailer Wiring Connector Carry
- Shop: Suspension Enhancement
- Search Results: spring helper
- Search Results: helper spring
- Video: How to Set Up Your Curt Front Mount Trailer Hitch Receiver on a 2006 Ford F-250 and F-350 Super Duty
- Video: SuperSprings Suspension Stabilizer and Sway Control Kit Installation - 2004 Ford F-250
- Video: Hands-On with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Video: etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2020 Subaru Outback Wagon
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Install: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation on a 2023 Toyota Highlander
- Video: Install: Universal Installation Kit for Trailer Brake Controller on a 2024 Kia Telluride
- Shop: RV Covers