What Is The Torque Spec For 12" Aluminum Trailer Wheels?
Updated 06/14/2021 | Published 06/11/2021 >
Question:
What is the torque range for 12inch aluminum wheels?
asked by: Deane D
0
Expert Reply:
The torque spec for your 12" aluminum trailer wheels will come down to the size of the wheel stud and lug nuts.
If your trailer uses the standard 1/2" wheel studs and lug nuts then you will want to torque the wheels to 75-85lb-ft. If you have a different wheel stud/lug nut size then just match it to the sizes listed on the included chart that goes over torque specs.
expert reply by:
Samuel C
0

Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: 2,000 lb Hub & Drum Compatible With 13 Inch Wheels
- Q&A: Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Grease Seal For a Dexter Hub On a 2,200LB Trailer Axle
- Q&A: Recommended Replacement Tires for Snowmobile Trailer Using 18.5x8.5-8 Tires
- Q&A: Recommendation for Adding Parking Brake to Electric Trailer Brake Assemblies
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)