Recommended Step/Walkway for Boat Trailer Tongue

Question

Question:

Do you carry any type of trailer tongue walkway platform for boat trailers.

asked by: Jim T

1

Helpful Expert Reply:

I do have step options which can be mounted to the tongue of a boat trailer but we don't have any sort of walkway platforms that you were referring to. I recommend the HitchMate Boat Trailer Step part # HE4036 which will fit any tongue up to 3" wide x 5" tall and provides a nice 5" wide x 9" long step.

expert reply by: Conner L

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 4

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 5

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 6

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Hey Thomas, the most important factors for picking out a replacement leaf spring for a trailer are matching axle capacity and length. Getting the same amount of leaves in the spring pack is actually not a huge priority so I wouldn't worry too…

view full answer...

Answer 9

Hi Leo; I would start by checking to see if there are axle tags on the axles. They will probably have the capacity on them or at least a serial number the axle manufacturer could use to identify the axle. If the trailer manufacturer is still in…

view full answer...

Answer 10

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Answer 11

Hello Mark, thanks for reaching out. When replacing leaf springs, it is important the new springs are identical in length to the old ones. There is a small amount of tolerance, like 1/2" or less, but any more than this can throw the suspension…

view full answer...

Answer 12

Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4"…

view full answer...

Recommended Step/Walkway for Boat Trailer Tongue

Product Page this Question was Asked From

Continue Researching