Replacement 6.90-9 Wheels And Tires For Trailer
Updated 01/19/2021 | Published 01/15/2021 >
Products Featured in This Question
Question:
I am looking to replace the wheels and tires on my trailer. RIght now, I have Carlisle Trail USA 6.90-9 tires on it. My wheels are 5x5.5 but they have a 5 hub. I could go to a 10 wheel if I need to, I have room. But, I must have that 5 hub. I dont see any intel here on the hub sizes for your wheels. My wheels are 9" Lugs are 5 on 5.5 4" pilot hole Please advise. Thanks
asked by: Michael Q
Expert Reply:
Your 6.90-9 tires are an older style that we only carry replacement tires for - # AM10040, but I do have a solution for a close matching wheel and tire combination.
Your current wheels/tires measure 21.1" in diameter; the closest we have to that is a Kenda Loadstar 205/65-10 Bias Trailer Tire # AM3H453, which is 20.5" in diameter and 8.3" in width. This will only be approximately 1/4" shorter than your current setup.
This wheel/tire combo has the 4" pilot hole and 5x5.5 lug pattern that you need.
This has a maximum load capacity of 1,100 lbs at 50 psi per wheel/tire.
While this setup has a very slight difference in size compared to your current setup, it is still a good idea to measure and make sure that this will fit your trailer.

Product Page this Question was Asked From
Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- 5 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Search Results: trailer tires and wheels
- Shop: Steel Solid Center Trailer Wheel - 10" x 6" Rim - 5 on 5-1/2 - White
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR E
- Article: How to Determine Tire/Wheel Diameter
- Shop: Steel Solid Center Trailer Wheel - 9" x 4" Rim - 5 on 4-1/2 - White
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range C
- Search Results: 5 on 5~1/2 inch trailer tires and wheels
- Q&A: Does The Center Hole/ Pilot Hole Size Matter If It Is Larger Than My Existing Wheels When Replacing?
- Q&A: Will 6.90-9 Tire Fit 9" x 4" Steel Trailer Wheel
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Trailer Axle with Idler Hubs: The Breakdown
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM3H453
- Q&A: What Size Valve Stem Hole Does Steel Solid Center Trailer Wheel # AM20053 Have
- Search Results: hub extender
- Q&A: Replacement Trailer Hub with 5-on-4-1/2-Inch Bolt Pattern
- Q&A: Can Tubeless Tires be Used on a Tube Tire Trailer Wheel
- Q&A: Replacement Trailer Idler Hub That Uses L68149 Inner and Outer Bearings and 5-on-4-1/2 Bolt Pattern
- Search Results: 205/65/10
- Search Results: ah25555f
- Search Results: 1 3/8 x 1 3/8 hub
- Search Results: 205 65 10
- Video: Detailed Breakdown of the Dexter 5 on 5-1/2 Hub and Drum
- Video: Feature Breakdown: 2-5/16" Hitch Ball
- Video: All About the 2-5/16" Hitch Ball w/ 1" Rise