Can Reese Trailer Hitch Locks Be Ordered With Specific Key

Question

Question:

I have 6 Reese hitch locks that are all keyed the same. The key has AG21 on it. Can I get 6 more that match that key?

asked by: Gary A

0

Expert Reply:

There isn't a way to get a Reese hitch lock with a specific key number on it, so the best we can offer are new, keyed-alike trailer hitch locks, depending on if you need a standard hitch receiver lock, a trailer coupler surround style lock, or a trailer coupler latch-style lock. You would just need to select the "Keyed Alike" option on the product page.

Trailer Hitch Receiver Lock:
- Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879
- Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881

Trailer Coupler Surround Style Lock:
- Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-318

Trailer Coupler Latch Style Lock:
- Trailer Coupler Latch Lock - 7/8" Span # e98889
- Trailer Coupler Latch Lock - 2" Span # e98886
- Trailer Coupler Latch Lock - 3-3/8" Span # e98888

expert reply by: Kyle S

0

Answer 1

For your trailer that drags when pulling into a driveway, I first recommend looking into skid wheels like the Ultra-Fab Skid Wheels #UF48-979011. These sturdy steel wheels will attach to the rear of your trailer to help prevent the tail from dragging…

view full answer...

Answer 2

It sounds like you have a Reese Coupler Lock and are wanting to order another one that uses the same key you have now which is an A25. If that is the case then although I do not know exactly which Reese Coupler Lock you have (there are several), I…

view full answer...

Answer 3

The etrailer Trailer Wheel Lock #288-02020 is keyed unique. Someone else who has this wheel lock would not be able to use their key to remove this from your tire.

view full answer...

Answer 4

Yes, the keys from our etrailer.com Coupler Lock, #e98889, and other etrailer.com locks can be replaced if they are lost, but I strongly recommend recording the key number that is stamped on the key. The key number is used for replacement keys, so I…

view full answer...

Answer 5

To select the correct ball mount that will allow you to tow level, you must take two measurements into consideration. First, measure from the ground (on level ground) to the top inside portion of your square hitch receiver opening. Second, measure…

view full answer...

Answer 6

We do have a set of keyed-alike 5/8" hitch pin locks and trailer coupler locks, which fit standard hitch ball couplers. What you are looking for is the etrailer Hitch Receiver and Coupler Lock Set - 2" Hitch - 1/2" Coupler Latch -…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Can Reese Trailer Hitch Locks Be Ordered With Specific Key

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching