Is There a Light Bar Attachment for Top Channel of Thule Wing Bar Crossbars

Question

Question:

Is there any attachments I can use to mount a light bar to the Thule Evo roof rack bar system? Also are there attachments to mount a 270 awning to Thule truck bed racks for 2020 ram 2500 short bed.

asked by: Dave J

0

Expert Reply:

We have the LED light mounting bracket part # RR43174 which can be used in the top channel of a Thule Wing Bar like the part # TH711520 that you mentioned. We have the Rhino Rack Batwing part # RR33200 that can also fit the top channels of a ladder rack or crossbar that provides 270 degrees of coverage.

expert reply by: Jameson C

0

Answer 1

The LED Light Mounting Brackets for Rhino-Rack Vortex Aero and Heavy-Duty Crossbars #RR43174 are going to be 3.9" wide,1.77" tall, and 5.5" long. I have also attached a diagram depicting these measurements for you to check out as…

view full answer...

Answer 2

Hey Conrad. If you keep the factory roof rack you won't have enough distance at the end of your crossbars for the lift assist feature of the Thule Hullavator Pro Kayak Roof Rack item #TH898 to function correctly. Since you have the factory roof…

view full answer...

Answer 3

You will need to install a roof rack on your 2007 Dodge Ram Megacab to allow the MegaWarrior part #Y07080-82 to install on the roof of your truck. For that the best rack is the Thule Wingbar Evo Rack part numbers #TH711520, #TH480R, and #THKIT1528 as…

view full answer...

Answer 4

Hey Ken! The 50" aero bars are definitely going to be too short. Each Thule Hullavator item #TH898 requires 28-1/2" of crossbar space, so with two of them you will need at least 57" crossbars. This means you'll have to install the…

view full answer...

Answer 5

Actually the Thule Hullavator part #TH898 that you referenced comes with straps for the bow and stern of the boat loaded in it so you would not need to provide those additionally. The carrier comes with everything needed to mount onto your roof rack…

view full answer...

Answer 6

Hey Phillip, Roof rack parts are not compatible with other brands so your Retrax bars would not be able to be used with towers from Rhino Rack or any other brand. The only part that is standard is the actual t-slot throughout those parts. You need to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The Thule Hullavator Kayak Carrier #TH898 weighs 40lbs, requires crossbar space of 28-1/2", and the crossbars need to extend past the roof rack legs by at least 4" on each side. So in order to fit two on your Subaru Forester, you will need…

view full answer...

Answer 9

I'd be happy to help out! It sounds like the knob on the clamp for your Thule EasyFold XT Bike Rack #TH903202 is locked. If you unlock it then you'll be able to open up the clamp like normal. This is a standard operation for Thule locks that…

view full answer...

Answer 10

Even though it is not a fit for it, it is not impossible to install the #C92UR Trailer Hitch Receiver on a 2019 Honda Civic Si. However, in order to do this, you will need to remove the center mounted exhaust pipe. I have attached a few photos for…

view full answer...

Answer 11

An air powered die grinder will give you the best cut and finish when installing the Curt hitch part #C92UR on your 2018 Honda Civic Hatchback. But a Dremel tool with a cutting wheel that's powered by electricity would also work too.

view full answer...