Replacement Hubs for 1994 Shelby Haulin Trailer
Updated 08/16/2012 | Published 08/14/2012
Question:
I have a Haulin tilt style utility trailer model is a Shelbyinch #5133, it is pretty old. I bought used and just had the bearings blow out on one side. Upon inspecting the hub needs to be replaced and I figure I will do both as I am sure the other side is bad also. Cant seem to figure out a good replacement hub thats ready to go. Can you help? The 4 lug hub has a number stamped on the back: 8-91A also has A6inch stamped on it.
asked by: Paul
Expert Reply:
To find the correct hub for you, I will need to know the wheel bearing numbers or an accurate measurement of the spindle with a digital caliper. I will also need to know the bolt pattern of the hubs you are replacing.
The cages that the wheel bearings sit in should have a reference number stamped on the back of them (see diagram). I will also provide you a diagram showing where on the spindle the measurements need to be taken.
You will also want to make sure that your spindles are still in decent shape.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Measuring To Choose The Right Trailer Axle
- Video: What to Know About the Trailer Idler Axle Beam with Easy Grease Spindles
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles
- Search Results: hub assembly
- Search Results: 4x4 hub
- Search Results: axle flip kit
- Search Results: e25gr
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: Can Trailer Axles be Flipped Upside Down
- Q&A: Are Leaf Springs Installed Under the Axle or Over the Axle?
- Q&A: How To Find the Weight Capacity of a Dexter P-11 Axle
- Q&A: Can I turn my Boat Trailer Axle Upside Down to Gain the Clearance I Need?
- Q&A: Parts Needed to Do an Over-Under Kit on a 1-3/4 inch Trailer Axle
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Search Results: pintel hitch
- Search Results: bearing buddy 1980
- Q&A: Trailer Spindle Got a Nick In it from a Grinder Should the Axle be Replaced
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Video: TruRyde Trailer Suspension TRSS175 Review
- Article: Trailer Wiring Diagrams
- Search Results: trailer leaf springs
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
on Trailer Hubs and Drums
