How To Reconnect the Rear Panel On An Extang Solid Fold 2.0 Hard Tonneau Cover

Updated 01/17/2025 | Published 09/18/2019

Question:

Last panel on hard tri fold truck bed cover came apart need to know how to reconnect. Thank you

asked by: Vicky

Expert Reply:

If you have the Extang Solid Fold 2.0 Hard Tonneau Cover then you will first need to remove the tail hinge end caps on each side of the panel. Once these are removed you will see that there is a channel on the hinge and a groove on the cover that will slide into this channel. I called Extang but they were very reluctant to provide any details as they suspect there was damaged that caused the panel to separate.

I have attached a photo for you that may help with the above process but if you need any replacement parts then I will need to know exactly what model you have.

expert reply by: Conner L

click to enlarge

Carl N.

9/25/2024

Tried to remove the end caps but the Allen screws are stripped. Best way to get screws out?

Jameson C.

9/25/2024

@CarlN You might have to drill them out or use an EZ out.

Bill

1/17/2025

They are not allen head; they are T 20 torque head screws. After you get them out everything comes apart very easily. I had mine back in the hinge and five minutes. You will have to remove the straps that hold the two panels together so you can slide the rear one back the hinge groove