Is Replacement Damper for Jensen Wall Vent Available

Question

Question:

my stove interior vent is Jensen by Elixir but Im missing the flapper to the outside vent cover. 2005 forest river lexington 210D motorhome 22 ft

asked by: Renee R

0

Expert Reply:

I believe you are referring to the damper like part # BCA0472-00. We do have entire replacement wall vents for range hoods like the 10-1/2" x 3-3/4" Ventline # V2111-13 (which comes with a damper) but we don't have a replacement damper that we know for sure is compatible with your Jensen vent. I recommend replacing your vent with the one mentioned above as long as the measurements match so that you have an updated vent so that it is easier to find replacement parts in the future.

expert reply by: Jon G

0

Answer 1

The Ventline Exterior Wall Vent for RV Range Hood part #V2111-55 is designed to be installed in a 10-1/2" wide x 3-3/4" tall opening. If this is what you have once the existing, partial vent is removed then it will be a great replacement…

view full answer...

Answer 2

We do offer a Replacement Damper for Ventline RV Range Hood w/ Horizontal Exhaust #BCA0472-00, which comes in a single piece and has overall dimensions of 9-7/16 inches long x 4-1/2 inches wide. This appears to match the dimensions you are needing…

view full answer...

Answer 3

Yes, the internal damper in the Ventline Exterior Wall Vents for RV Range Hoods, parts #V2111-55 in black and #V2111-13 in white, opens automatically when you turn on the exhaust fan in your RV's kitchen range hood. These vents also have a…

view full answer...

Answer 4

We have one replacement damper that is pretty close to what you mentioned with the part #BCA0472-00 but this measures 9-7/16" long x 4-1/2" wide so it's about 1 inch less tall than what you mentioned.

view full answer...

Answer 5

The dimensions of the Ventline Replacement Damper for Ventline RV Range Hoods #BCA0472-00 are 9-7/16- long x 4-1/2-inches wide. Based on your photo this replacement part does not appear to be compatible with the size of your vent opening. You may be…

view full answer...

Answer 6

If you are just straight up replacing the part with the Replacement Damper #BCA0472-00 then it will perform the same as your old one which means it will probably be making that flapping noise when you're on the highway. Normally there is some way…

view full answer...

Answer 7

The Replacement Damper #BCA0472-00 that you referenced is a fit for Ventline P, B, and T Series range hoods so it is compatible with your PR-8 range hood. It does not come with installation instructions as you simply maneuver the damper so that the…

view full answer...

Answer 8

The replacement damper isn't available in white, unfortunately. The part measures 9-7/16 by 4-1/2 inches. These vents are usually specific to the brand of the vent hood. The closest thing we offer to what you're looking for would be part…

view full answer...

Answer 9

Yes, the replacement lens you would want for your #MCL31RB is the part #A31RB.

view full answer...

Answer 10

If you are referring to one of the Ventline P, S0721, B, and T Series range hood, the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood #BVD0218-00-R would not require you to use a resistor or fuse to install it. It sounds like you could be…

view full answer...

Answer 11

Hey Linda, Yep, it sure will; the WeatherTech Roll Up SunShade Kit #WT87QV will indeed fit your 2024 Nexus Viper 27V. This is a good choice as it is double-sided with one reflective side to keep the sun (and heat!) out of your motorhome, with the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Is Replacement Damper for Jensen Wall Vent Available

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching