Will a Toolbox Work with a Ladder Rack on a 2010 Ford F-150

Question

Question:

Can a tool box fit across the back of the truck with this ladder rack?

asked by: Joe

0

Expert Reply:

The Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 is designed to work with chest style toolboxes such as the DeeZee Red Label Truck Bed Toolbox part # DZ8546B. In order to use this ladder rack with a crossover style toolbox like the DeeZee Specialty Series Truck Bed Toolbox part # DZ6170NB the toolbox will need to be moved toward the tailgate about 12-16" to allow for the ladder racks mounting feet to mount.

expert reply by: Conner L

0

click to enlarge

Answer 1

Your pictures didn't make it through. Could you email them to me?

view full answer...

Answer 2

The Yakima Overhaul HD Ladder Rack part #Y01151-5868 is designed to attach to the utili track you have in the bed of your 2013 Nissan Frontier and will allow you to keep using the utili track tool box you have. I'd put the ladder rack bar in…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Josh, The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 unfortunately won't fit your 2023 Chevy Silverado 1500 8' bed, and it doesn't look like Pace Edwards has an alternative option so we'll need to go with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…

view full answer...

Answer 8

Hey Les, thanks for reaching out. So, the 18,000 BTU Furrion Chill Cube AC Unit #LC94DX can replace your Coleman Mach AC unit, but you will need to replace your controller, distribution box and thermostat as well. According to Furrion, the Chill Cube…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Welcome back Dan! The B&W Fifth Wheel Wedge Kit item #SWW-06, referenced is exactly what you need for your new B&W Companion item #BWRVK3710.

view full answer...

Answer 11

Hello again Steve. According to Gen-Y, you want to go off the actual GVWR when selecting your pin box. Since your GVWR is 15,495 you will definitely want to go with the 2,500 lbs - 4,500 lbs pin weight capacity range. The Gen-Y Hitch Shock Absorbing…

view full answer...

Answer 12

Hey Bob! The Chill Cubes like item #LC22BX do not have a heat pump. This may change upon their release but as of 11/18/2024 the answer to that question is going to be no. There's a couple of different options of the Chill Cube as far as ducted…

view full answer...

Will a Toolbox Work with a Ladder Rack on a 2010 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching