Replacement Wire Lock Lynch Pins for Curt TruTrack Weight Distribution System 17500

Question

Question:

Will this part work with the Curt 17500 TruTrack Trunnion? It looks the same but how do the sizes compare? If it doesnt, do you have the part for the Curt?

asked by: John C

0

Expert Reply:

My contact at Curt Manufacturing advised that they do not offer the replacement Wire Lock Lynch Pins (shown as part number 10 in their instructions, which are linked) that secure their TruTrack's trunnion bars at the head end but he said you're fine using a similar part from another maker.

The original pin is 3/8-inch x 2-1/2-inch. The Equal-I-zer part # EQ95-01-9415 that you referenced will work fine.

expert reply by: Adam R

0

Answer 1

I went out to the warehouse and pulled Pins and Thumb Clips #EQ95-01-9415 to measure them for you. The diameter is 3/8 of an inch. The usable length is just under 2-1/2 inches (2.45 inches). And the opening is 2.46 inches by 1.5 inches.

view full answer...

Answer 2

Hello again Evan; between the Rhino-Rack #RR86ZE (this is the same rack from the other answer with everything under one part) and the Thule #TH48ZA the Thule is your best option. I'm assuming you have a 2023 Wrangler Unlimited which is what these…

view full answer...

Answer 3

Hey David, could you possibly move the gas line? That would be most ideal I would say. Otherwise you'd have to potentially add material to the frame so that the Stabilizer Jack part #TV68FR could attach to it without having the line cause…

view full answer...

Answer 4

Hello William, thanks for reaching out. The Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM82MR is for 2-3/8" diameter axles which is the standard 3,500 lb axle size. So this would absolutely work with a tandem 3,500 lb axle trailer as…

view full answer...

Answer 5

Hi James, What stabilizing system does your Catalina currently have? Do you just have regular scissor jacks like the #TJSCHD-24-4 or do you have a motorized system like the Lippert Ground Control TT #LC672136 or Ultra-Fab #UF39-941705? Let me know…

view full answer...

Answer 6

You could power the Phoenix Electric Trailer Jack #UF38-944040 by wiring it to the 12v accessory wire of the 7-way in your junction box, like part #38656, instead of wiring it directly to the battery. There are pros and cons to this though. The pros…

view full answer...

Answer 7

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 8

It's definitely okay to use 2 sleeves to reduce your 3" receiver down to a 2" receiver. We actually have our Reducer Sleeve Kit #e33YR which this setup. If you'd feel safer with 1 solid piece then it sounds like you're wanting…

view full answer...

Answer 9

We do have our Trailer Hitch Receiver Reducer Sleeves #e33YR which includes a 3" to 2-1/2" reducer and 2-1/2" to 2" reducer. These can be used individually or together if you need to go from a 3" to 2" receiver. We do…

view full answer...

Replacement Wire Lock Lynch Pins for Curt TruTrack Weight Distribution System 17500

Product Page this Question was Asked From

Continue Researching