Installation of Hanger Brackets and Springs for Tandem Trailer Axles
Published 11/01/2018
Products Featured in This Question
Question:
i went to a trailer supply and ask for weld on brackets for tandem wheel trailer that we are building her gave me 4 hangers that were like 2 that was for the front spring for both sides and back springs for both side for the middle hangers he gave me two that were 3inch long or more the axles and the equializer dont look right .. but looking at all other trailers its only like an 1inch 0r 1-1/2inch off of where the other trailers are when no load on them..and what the pictures i have seen of what they should look like..i hope what i said makes cents to yall..
asked by: Richard W
Expert Reply:
It is not uncommon for the trailer hangers on a tandem axle trailer to be all the same size or for there to be different sizes that can be 1-1/2 to 2 inches different in height when you compare the center hanger to the front and rear. For example, the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center # APT8 has that 2 inch difference in size. I've attached an article on suspension to help further as well.
You will want to make sure you position your axles properly and space your hangers correctly as well.
I've attached a photo of typical dimensions used for 3,500 lbs axles and hanger locations.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: fulton k2550
- Search Results: mcl110akb
- Search Results: dump trailer
- Search Results: 10~19 seal
- Article: Double-Eye Trailer Suspension System Review
- Search Results: spare tire mount
- Search Results: wfco 8735
- Search Results: weigh safe trailer hitch ball mount
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Opti-Brite LED Utility Light - Aluminum Housing - Oblong -19-5/8" Long
- Article: Where to Position the Trailer Axle?
- Shop: Blazer Floodlight - LED - 1,200 Lumens - 3-1/2" Wide x 2-1/2" Tall - Rectangle - Qty 1
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 20' Long
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 23-1/3' Long
- Shop: etrailer Square Jack wHandle - Foot Lever - Drop Leg - Spring Return - 12K Lift - 26.5" Travel
- Shop: Kodiak Hydraulic Brake Hose - 1/8" ID - DOT Approved - 3/16" Male Fittings - 26'
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Should Trailer Suspension Shackle Straps Mount Below or Above the Equalizer
- Shop: RV Interior Lighting
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Determine Correct Replacement Wheel/Tire for Harbor Freight Folding Trailer
- Q&A: Hanger Distance for Installing 25-1/2 inch Leaf Springs with Hanger Kit # APT8
- Q&A: How to Determine Hanger Spacing on Tandem Axle Trailer
- Video: Review of Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - TK57VR
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU32FR
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Q&A: Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
on Trailer Leaf Springs
