3,500 lb Trailer Hub/Drum with 5 on 4-3/4 inch Bolt Pattern
Updated 09/12/2018 | Published 09/11/2018
Products Featured in This Question
Question:
I am building a trailer with 3500lb axle. I know that Etrailer sells pt#845475UC1. I didnt see or I missed it. Looking for a drum so I can put brakes on my axle. The axle will be a Dexter or Libert. The local stores are less than helpful. Trying to match my trailer and tow vehicle. Tires and wheel set up. Trailer drums and brakes 5x4.75
asked by: Dave
Expert Reply:
For a hub/drum with a 3,500 lb capacity and the bolt pattern of 5 on 4-3/4 inch like you said you need you'd want the Dexter part # 845476UC3 which would fit and work well. The drum size is 10 inch and for assemblies you'd want the # 23-468-469 for self-adjusting assemblies for both sides of the trailer.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Q&A: etrailer Square Jack TJDDP-20000SP-F - What Is The Size Of The Leg?
- Q&A: 4 Inch Drop Spindle Compatibility with Dexter 3,500 Pound Axle
- Q&A: What is Bolt Pattern of Dexter Trailer Hub part # 84545BX
- Q&A: Correct Replacement for Dexter 010-036-00 Grease Seal
- Q&A: Replacement Brakes and Hub/Drum Assembly for Dexter Axle 5.2K - 7K E-Z Lube Axles