Replacement for Older Dexter 7,000 Pound Torsion Axle

Published 07/19/2018

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2811)

$15.39

Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs

(198)

$89.85

Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs

(191)

$89.93

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(293)

$160.44

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs

(122)

$1295.41

Question:

Hello, We are looking for a price on an Dexter Axle s/n d0063724, Is 8 hole x 6 1/2 hub hub diameter 3 1/8, thinks its a 7k and it is a torsion suspension please advise

asked by: Terry

Expert Reply:

I spoke with my contact at Dexter regarding the axle on your trailer. He stated that the serial number you found is a pretty old number and unfortunately they don't have much information on this particular axle. He was not able to confirm its rating or length.

If you are looking to replace the axle, we do not have any torsion axles available but I do have a great option. I recommend taking a look at an Axle-Less System like the Timbren # TASR7KS01. This 7.000 pound system will provide a smooth, quiet ride and can eliminate the need for a standard axle. It consists of two separate units, each containing steel arms and two strong, hollow rubber springs. They will fit any frame width.

I have attached a short video demonstration so you can see exactly how it installs.

For compatible hubs with an 8 on 6-1/2 inch bolt pattern you can use the Dexter # 42866UC3-EZ. Then for the needed brake assemblies you can use # 23-0105 for the Left Hand and # 23-106 for the Right Hand.

expert reply by: Chris R