Recommended Equal-I-zer Weight Distribution Hitch for Ice Castle Fish House Trailer

Published 12/08/2017

Products Featured in This Question

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(270)

$19.45

Thin Walled Socket for Equal-i-zer Hitches

(98)

$88.04

Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW

(64)

$140.07

Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW

(24)

$237.40

Question:

Will pole tongue adaptor EQ-01-5950 AND FA94-00-1061 work together? Thanks

asked by: Chris K

Expert Reply:

For your Ice Castle Fish House, the weight of the unit will determine what Equal-I-zer system will work best. A weight distribution system is based on the total tongue weight of the loaded trailer along with any cargo weight behind the rear axle of the tow vehicle. Because these trailers are fairly good sized, I'll give you a recommendation for a larger system. You want that total tongue weight to fall in the middle of the range of the system for best results.

For a total tongue weight of 1000 lbs, I recommend the Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW # RP58393 along with the Equal-I-zer # EQ37120ET. This system is rated for tongue weight between 800 and 1200 lbs. It will come with a 2-5/16 inch hitch ball, but you will need a thin walled socket like # ALL643216 to install it.

expert reply by: Jason S

Chris K.

12/8/2017

Will pole tongue adaptor EQ-01-5950 AND FA94-00-1061 work together? Thanks

Jason S.

12/8/2017

Yes, the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW # EQ95-01-5950 will work seamlessly with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16" Hitch Ball - 10K GTW # FA94-00-1061. You will still need thin walled socket # ALL643216 or # EQ70-00-4800. The Fastway system will only have 2-point sway control, versus the 4-point sway control of the Equal-I-zer system due to a different design in the weight distribution head, but the systems are made by the same company and their parts you asked about will work together.