Goal Zero Extension Cable for a Boulder 100 and Goal Zero Yeti 1000 Generator.

Question

Question:

Can I use the Goal Zero Extension Cable - 8 mm - 15 ft. to connect a Goal Zero Boulder 100 solar panel to a Goal Zero Yeti 1,000?

asked by: Rolando B

0

Expert Reply:

The Goal Zero 15 Ft. Extension Cable, part # 287-98065 is intended to connect the Goal Zero Boulder 100, part # 287-32408 to any of the Yeti or Sherpa Generators. You will not want to exceed 30 volts of output when connected to any of these Generators.

expert reply by: Jacob W

0

Answer 1

The extension cord that you need to connect the Goal Zero Yeti 1400 to the Boulder 200 Briefcase part #287-32409 is the Extension Cable for Goal Zero Boulder 200 Briefcase part #287-98064 which is 15 feet long. The Goal Zero Extension Cable part…

view full answer...

Answer 2

Yes, the Goal Zero Boulder 100 Briefcase Solar Panel - 100 Watts, part #287-32408, will work with your motorhome with the addition of the Goal Zero 10 Amp Solar Charge Controller with Battery Terminal Connections for Boulder Solar Panels, part…

view full answer...

Answer 3

Correct, in order to attach to a Goal Zero Boulder Solar Panel like part #287-32406 to the Redarc In-Vehicle BCDC Battery Charger part #331-BCDC1240D you will need to remove the 8mm adapter plug and hardware the leads directly to the battery…

view full answer...

Answer 4

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The best hitch for a 2024 Subaru Crosstrek is the etrailer item #e98912. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

It sure does! The etrailer Hitch item #e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500…

view full answer...

Answer 11

Hi Tom; I wasn't able to find specific specs for a Giant Trance 3s so I'm not 100% sure if the bike rack can hold it. Looking at similar models like the Trance X 3 I'm willing to bet it can. As long as your bike doesn't weigh more…

view full answer...

Answer 12

I wish we could help but we don't have an online version of the ecohitch instructions we can share. This does come with them but EcoHitch is very protective about their intellectual property so they don't do digital versions. With that said…

view full answer...

Goal Zero Extension Cable for a Boulder 100 and Goal Zero Yeti 1000 Generator.

Product Page this Question was Asked From

Continue Researching