Recommended Steering Stabilizer for 2008 Workhorse W22 Chassis Class A RV

Question

Question:

I need a steering stabilizer for a 2008 W22 workhorse class A RV.

asked by: Dave T

1

Helpful Expert Reply:

For your 2008 Workhorse W22 Chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA. This system has a tempered steel spring that works when compressed to push back to center and when extended to pull back to center. It helps minimize wander and will help you maintain control in the event of crosswinds, rut tracking, uneven lanes, and even a tire blowout. It will install in about 1 hour and will give you far less driving fatigue.

expert reply by: Jason S

1

Ray S.

5/13/2025

My 2007 W22 came with Bilstein Stabilizer. Would I be able to use my existing brackets and swap out the old Stabilizer with the Roadmaster? Thank you.

Reply

Jesse M.

5/19/2025

@RayS Hello Ray. We have not tested the Roadmaster stabilizer compatibility with the Bilstein brackets, since we do not carry the Bilstein brand, but generally those kind of parts would be brand specific and would not be cross compatible. So I would have to recommend using the brackets that come with the Roadmaster stabilizer.

Reply

Answer 1

In regards to the Roadmaster Reflex Steering Stabilizer part #RM-RBK13-RSSA, the chassis bracket which is the larger of the two will be installed on the passenger side preferably but can be installed on the driver side as well. That said, I don't…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

No, it does not but Firestone does make one. It is the No-Drill Mount Kit for Firestone Air Tank and Compressor item #F2530. This will allow you to get the Firestone Air Command Extreme Duty Air Compressor with Tank item #F46VV installed and you…

view full answer...

Answer 5

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Answer 6

To add a set of air bags to your 2024 Ford F-250 4WD, I recommend the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F95FV. I really like the Firestone airbags because they use a crimp rolled design which is much more durable…

view full answer...

Answer 7

When you have the minimum air pressure in the air bag kits like the Firestone kits that fit your 2020 Ford F-350 it would not affect the ride quality at all. As you add pressure you may notice it get bouncier. The ride quality is not significantly…

view full answer...

Recommended Steering Stabilizer for 2008 Workhorse W22 Chassis Class A RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching