Bunk Ladder Recommendation for Two Different Height Bunks in Trailer  

Looking at your picture we have a wheel that's close but I'm not sure it's exact. Directional wheels aren't all that common on trailres but we have part #AM20259 which is a Dexstar steel wheel with a 5 on 4-1/2 bolt pattern. It looks…

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

It is a little difficult to see the rounded edges that you mentioned in the picture but the Stromberg Carlson RV Bunk Ladder #LA-466 should still work well to allow for easy easy access on the bunk. I have attached an image that gives you a closer…

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

I called my contact at RackEm and asked about the Fitz-All Enclosed Trailer Ladder Rack, part #RA-28 and your all aluminum trailer. They told me that two sets would be ideal for your trailer since it is 12-ft long and the load capacity would be…

While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you can see…

Yes, the Replacement Operator Mechanism part #MA10-20281K-1AF is indeed the correct one for a MaxxAir MaxxFan Plus 4500K. We also sell this complete vent as part #MA00-04500K.

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…