JT Strong Arm Stabilizers for 2017 Keystone Montana 3950BR 5th Wheel with 6-Point Auto-Leveling
Updated 05/26/2017 | Published 05/25/2017
Products Featured in This Question
Question:
I am looking to purchase the 2017 Montana 3950BR 5th wheel and has a 6 point auto-leveling system round tubes. I would like to have the 4 outer corners with the JT Strong-arms. I would want to have 2 bars on each corner for a total of 8, as opposed to just 2 each in front and 1 each in back like I currently have, a total of 6. I currently have a travel trailer with the JT Strong-arms on my scissor jacks and works very well. What would be the part numbers I would need for a complete installation? Thanks in advance.
asked by: Ron
Expert Reply:
To select your correct JT's Strong Arm stabilizer kit for your 2017 Montana 3950BR 5th wheel you will want to measure the distance between your landing gear legs. If less than 58-inches use kit # LC191024 or kit # LC191023 if there is more than 58-inches between them.
Each bolt-on kit contains six stabilizer tubes. Four attach to the front of the coach and two to the rear. My contact at Lippert confirmed they do not offer an 8-pc setup like what you describe but he did confirm the above items are compatible with the auto-leveling system on the trailer.
The patented universal system is designed to attach to the three main types of jacks found on RVs, scissor, front landing gear and telescoping, without welding required.
Product Page this Question was Asked From
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ Less Than 58" Between Landing Gear
- Camper Jacks
- 5th Wheel Camper
- Stabilizer Jacks
- Steel
- Manual Jack
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Video: Lippert JTs Strong Arm 5th Wheel RV Jack Stabilizer Kit Review
- Video: Review of Lippert Camper Jacks - Stabilizer Jack - LC191023
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- Q&A: Recommended Hitch for a Trailer w/ a 70 Inch Wide Frame
- Q&A: What JT Strongarm Kit Should I Get For My 5th Wheel With 54-1/4' Between Landing Gears
- Q&A: Which MORryde X-Factor Can be Used with CRE3000 MORryde Equalizer Kit 2022 Grand Design Imagine
- Q&A: Product Comparison Of MORryder Scissor Jack Cross Brace And JTs Strong Arm Jack Stabilizer Kit
- Q&A: JTs Strong Arm Jack Stabilizers for 5th Wheel Over Or Under 58 between landing Gear
- Q&A: Recommended Ways To Stabilize Bouncy 5th Wheel Trailer Other Than King Pin Stabilizer
- Q&A: How Are The Rear Stabilizers For JT's Strong Arms Connected To Auto Leveling System?