MaxxAir Vent Cover Recommendation for a Ventline Ventadome V3094 Roof Vent

Question

Question:

I have a Cyclone 4000 that has Ventadome V3094 Vents on it and I would like to get vent covers for them I recently purchased some Maxxair II Vents and they did not fit due to the Ventadomes already having mounting tabs on them. Do you know what vent covers will fit?

asked by: Brandon H

0

Expert Reply:

You would need the standard MaxxAir Vent Cover part # MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome # V3094-603-00C.

expert reply by: Jameson C

0

Answer 1

Yes. If you've got a Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - Smoke - Canada Approved #V3094-603-00C, which is the same as the V3094 you mentioned, then the Replacement 12V DC Motor for Ventline, Ventadome, and…

view full answer...

Answer 2

Since you mentioned that the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 will not fit your Ventline E-Z Lift Ventadome Trailer Roof Vent #V3094-603-00C I recommend going with the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover…

view full answer...

Answer 3

We do have the MaxxAir standard vent cover, #MA00-933069, since the MaxxAir II doesn't work with vent #V3094-603-00. The cover is also available in white #MA00-933066. From what I could find these are the only two that will work.

view full answer...

Answer 4

Oddly enough we don't have any Ventline brand RV roof vent covers at this time so best option for a vent cover that fits your #V3094-603-00 would be a universal style cover like the MaxxAir part #MA00-933069.

view full answer...

Answer 5

Most regulators like the part #CAM59005 have an inlet of 1/4 inch SAE and an outlet of 3/8 NPT. It would be out of the ordinary if your tank to regulator wasn't 1/4 inch SAE inverted flare. Part #CAM59053 has this style of fittings on both sides.…

view full answer...

Answer 6

Yes it is super simple! The Complete Propane Tank Holder Mounting Kit for 20-lb Tanks part #37220BL is secured to the tongue of the trailer using self tapping screws. #14 self tappers have always worked out really well and they will go into the three…

view full answer...

Answer 7

Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift #TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also…

view full answer...

Answer 11

The Firestone Ride-Rite Air Helper Springs part #F2609 which is a fit for your 2019 Chevrolet Silverado 1500 comes with everything that you need for installation save for tools unless you have a Z71 or High Country package. If you do then you will…

view full answer...

MaxxAir Vent Cover Recommendation for a Ventline Ventadome V3094 Roof Vent

Product Page this Question was Asked From

Continue Researching