Can I Tap Into Any 12V Power Source at the Rear of a Toyota RAV4 for Tow Harness Part 118412

Updated 05/14/2010 | Published 05/13/2010

Question:

Where exactly is the 12 volt tap in at the rear of the toyota rav 4? I have an 08 model I would very much like to keep all wiring in the rear if possible. Can a diagram of the location be sent to my E-mail address?...Thanks

asked by: Cedric S

Expert Reply:

The location that Tow Ready, manufacturer of the harness, and the location that we recommend is the positive battery post. There is not any wiring, readily accessible, in the rear of the RAV4 that can handle the amperage that is drawn through the power wire. Connecting the power wire to any power circuit in the rear of the vehicle can potentially result in a wire being over drawn and damaging the vehicle.

Included in the kit is a length of wire to run that power wire up to the engine bay and connect to the battery. It will also make access the fuse for this power line easier since you can have it readily accessible in the engine bay. I have added a link to the instructions as well as a video with a complete install of this harness that shows how the power line can be run up to the front of the vehicle.

expert reply by: Patrick B