What Size Wrench is Needed to Tighten Adjustment Nuts on Reese Dual-Cam Sway Control
Updated 05/18/2015 | Published 05/16/2015
Question:
what size wrench do we need to tighten the bolts after our test drive?
asked by: Esther M
0
Expert Reply:
The large adjustment nuts on the dual-cam sway control # RP26002 require a 1-1/2 inch open end wrench to tighten/loosen as needed. I have included a link to the installation instructions for you as well.
expert reply by:
Michael H
0
Continue Researching
- Q&A: What Weight Distribution Hitch Should I Get for My Rockwood Mini Lite KS2304 Travel Trailer?
- Q&A: Replacement Parts for Reese Strait-Line Weight Distribution System
- Q&A: Installation Instructions for Reese Dual Cam Weight Distribution System
- Q&A: How to Eliminate Trailer Sway that Occurs at 55 to 65 MPH Even With Sway Control
- Q&A: Weight Distribution System Needed for a Trailer with a Tongue Weight of 2,300 lbs.
- Q&A: Reese Weight Distribution Dual Cam Brackets Dislodged from Trailer Frame
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Can You Add a Friction Sway Control Bar to a Trailer with Short Tongue
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)