Solution for Lost Key and No Key Number for Yakima Bike Rack Lock

Question

Question:

I have lost my key to my hitch mounted Yakima Bike Rack. How do I get the old lock off so I can replace it with a new one?

asked by: Dwayne

1

Helpful Expert Reply:

If you do not know the key number, your best alternative is to have a locksmith open the lock for you. I do not recommend trying to drill the lock out, as it is highly likely that the box would be damaged.

Once the lock is unlocked, you can use your control key to remove the lock core. If you no longer have the control key, we offer them as part # Y8007835. The key number will be engraved on the side of the lock cylinder. Once the key number is known, you can order a replacement key.

I have linked you to our selection of replacement Yakima Keys.

expert reply by: Jameson C

1

Answer 1

We do sell replacement Yakima keys for their accessories like the Fresh Tracks 4 #Y03093. The key to picking out the correct key though is knowing what key number you have. It's only written on the keys and on the side of the lock cores so if you…

view full answer...

Answer 2

I spoke with my contact at Thule regarding your older Thule Summit Ski/Cargo Box. He stated that this particular model cargo box measured 91 inches long, 13 inches tall, and 17 inches wide. Although a bit wider and just a tad shorter, the closest…

view full answer...

Answer 3

The correct replacement mounting hardware for your Yakima ButtonDown 6 Ski Carrier is the part #8830021. This is a direct replacement and will allow your carrier to fit round or square crossbars. If you want to be able to use the carrier on wider…

view full answer...

Answer 4

The easiest way to tell the Thule 725 and 726 ski/snowboard carriers apart is the 725 is a fixed carrier and the 726 allows you to slide the clamping portion out making it easier to load and unload your skis/snowboards. When you open the 726 there is…

view full answer...

Answer 5

The Replacement SuperLatch Handle kit, part #Y8880348 will include everything you need to replace both handles and comes prepackaged with a pair of matching SKS locks and keys that you can replace the existing. In this case, I do recommend a complete…

view full answer...

Answer 6

If the key number is not on the face of your lock core then it is on the side (not visible while installed). Unfortunately, there is no way to get this key number unless you remove the lock core. The sticker number that you listed will not tell use…

view full answer...

Answer 7

What you can use to grab the bit of broken key that is sticking out of the lock core is a set of nail clippers. First I would recommend using a penetrating lubricant like WD-40 with the straw to direct the oil into the lock core, and then using the…

view full answer...

Answer 8

I've had this happen to me before. Removing the broken portion of the key isn't the easiest thing in the world, but it can be done if you're patient. First, flood the lock with spray lubricant so all the tumblers and springs will be as…

view full answer...

Answer 9

I spoke with my Yakima representative, who tells me that your best bet would be to get the remaining piece of the key out of the lock if at all possible. To do this, you'll need some spray lubricant like PB blaster or WD-40 and a small tool like…

view full answer...

Answer 10

I reached out to my contact at Yakima and we are a little confused on what you are referring to. If it is part of the lock itself on your Yakima SkyBox 16 Rooftop Cargo Box - 16 cu ft - Black Carbonite, #Y07335, you will want to replace the lock with…

view full answer...

Answer 11

When using the change key part #Y8007835 to remove and replace a lock cylinder what you have to do is first have the lock in the unlocked position. Next you will insert the change key into the core. With the key in the core you will then be able to…

view full answer...

Answer 12

If your existing locks have a working key, the key number should be stamped into the key, and the necessary key number will be stamped or engraved on the side of the lock, as shown in the photo I provided. To order a replacement key, you'd order…

view full answer...

Solution for Lost Key and No Key Number for Yakima Bike Rack Lock

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching