Custom Fit Roof Rack Kit With INB117 | INK750 | INSUT
(296 reviews)
Price: $359.97
In Stock
Custom Fit Roof Rack Kit With INB117 | INK750 | INSUT
Item # IN44YR
Our Price: $359.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (296)
- Q & A (0)
- Videos (18)
- Photos
Inno Roof Rack - IN44YR
- Square Bars
- Crossbars
- 46 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 46" Long:- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
Inno Square Load Bars - Black - 46" Long:- Quantity: 2 crossbars
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 46" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-B117 Inno Standard Square Steel Load Bars - 46" Long - Black
K750 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Replaces INK234
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Video of Custom Fit Roof Rack Kit With INB117 | INK750 | INSUT
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Reviews
Custom Fit Roof Rack Kit With INB117 | INK750 | INSUT - IN44YR
Average Customer Rating: 4.7 out of 5 stars (296 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.by: Kevin 01/06/2024
Ford Flex
These bars are excellent. I like the coating to protect whatever you're hauling. There is absolutely 0 flex with my kayak mounted, unlike the aluminum aero bars I upgraded from.
by: 04/23/2024
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
by: Matthew 01/21/2024
Easy to install, great instructions, looks good, will use for bikes and kayaks, a welcome edition to our gas saver car
by: Michael09/21/2023
2015 Honda Civic
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
by: Blah Blah Blah Motorcycles04/08/2024
Easy to install and have worked great so far!
by: Ferne03/27/2024
Super easy to install and remove. Lock feature is great
by: Caitlin08/10/2023
Volkswagen Golf
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
by: Chris02/21/2024
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
by: David 05/08/2024
Perfection!!!
by: Charles 05/10/2024
Perfect fit.
by: Chris07/13/2023
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
by: Hugh02/12/2024
Shipping took considerably longer than originally promised. Product quality & value I consider both to be good.
by: Ian07/26/2023
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: Randy05/23/2023
Missing Parts - I am missing two of the end-caps for the INB117. What is the deal with INNO quality control that it cannot get 4 of these in a box at the same time and tape it shut? I did a search on Google and apparently this a a known QC issue!
by: Brian Kashner02/21/2023
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by: David08/12/2018
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: CP05/12/2023
Great roof rack. Easy to install and du rable!
by: LD05/14/2023
Toyota
Worked well for my 2006 Toyota Prius
by: Bradley07/16/2020
2003 Toyota Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by: Bob P.07/22/2016
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
by: Tom Burger05/23/2021
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
by: Mark08/22/2020
One of the lesser expensive rack kits for the Mazda5. etrailer delivered excellent! They had items in stock and shipped quick. I finally had a chance to install it this evening. My only frustration was evening out the bars. Measure, adjust and measure and adjust. I'll look into getting a fairing to reduce wind noise.
25
1002
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Will Inno Square Crossbar Roof Rack Fit on 2003 Subaru Forester X with Rola Roof Cargo BasketYes, the 46" Long Inno Square Crossbars # INB117 are compatible with both your Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT and your 2003 Subaru Forester X. Since your Forester has the flush mounted rails you need the Inno Feet # INTR and the Fit Kit # INTR104 to utilize the square crossbars. I have attached a photo of this same kit along with the 31" Inno Fairing for Roof Racks # INA260 on a 2008 Subaru Forester a customer sent in that you can check out.
view full answer...
- Roof Rack and Tie Downs to Carry Lumber on a 2014 Nissan JukeWhat I recommend is to add some load stops to the roof rack crossbars so that you can support the load side to side and use straps to secure the lumber front to back and tie off to the load stops. First you will need a roof rack for your 2014 Nissan Juke. The most cost effective roof rack that is a true custom fit is from Inno using square bars # INB117, feet # INSUT, and fit kit # INK399. Then for load stops I recommend # TH503 because they are designed to fit Tule square bars which...
view full answer... - Roof Rack That Allows Me To Use My Thule Square Bar Accessories On My 2016 BMW 328iYou will be able to install an Inno roof rack for your 2016 BMW 328i with fixed points. This roof rack will consist of the following items: Inno Square Crossbars - Steel - Black - 46" Long - Qty 2, part # INB117 Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet, part # INTR131 This roof rack has a maximum weight capacity of 140 lbs. This roof rack will...
view full answer... - Are Thule Square Bars Compatible With Inno Feet Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars # INFR, but if you have flush mounted rails you're going to need the Inno Feet for Square Crossbars # INXP with the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR.
view full answer... - Inno Roof Rack Compatibility With a 1998 Honda Civic Sedan With Factory Moon RoofYou can use Inno Square Bar roof rack on your 1998 Honda Civic with a factory moon roof, but you may not be able to open the moon roof with a load on the rack. For a complete roof rack, you will want the following parts: Square Crossbars # INB117 Roof Rack Feet # INSUT Custom Fit Kit # INK707
view full answer... - What Fit Kit Do I Need For Inno Feet Part #INXP For My 2016 BMW 328i With Fixed PointsThe Inno roof rack that is compatible with your 2016 BMW 328i will consist of the following: Inno Square Crossbars - Steel - Black - 46" Long - Qty 2, part # INB117, Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet. part # INTR145. I have included a product description link below.
view full answer... - Will Inno Square Bar Roof Rack Fit A 2018 Mercedes GLA45 AMGYes, the Inno Square Crossbar Kit including parts # INB117, # INXP, and # INTR162 are a confirmed fit for your 2018 Mercedes GLA45 AMG. We can't recommend using duct tape between the mounting feet and your factory rails. The rack was designed to fit to the factory flush mounted rails so an additional material between the two could affect it's hold and reliability. These feet are designed to fit without scratch or damage so you can feel good about this solution. I have also included...
view full answer... - Roof Rack Recommendation for a 2016 Jeep Cherokee with Raised RailsThe Sportrack Roof Rack part # SR1098 is a confirmed fit for the raised rails of your 2016 Jeep Cherokee and would work well enough for a roof rack on your vehicle. This is a semi-custom rack though so it wouldn't fit quite as well a custom rack that is specifically designed with your vehicle in mind. For a better option that is still priced good I would rather recommend you the Inno part # INB117 and # INFR as the Sportrack racks seem to be somewhat hit or miss. I can guarantee the Inno...
view full answer... - Roof Rack Recommendation for a 2001 Ford Escort 4-Door SedanYakima does not have a roof rack solution for a 2001 Ford Escort 4-door sedan, but Inno does. You can use the following parts to add a roof rack: Inno Square Load Bars, # INB117 Inno Roof Rack Support Feet, # INSUT Inno Roof Rack Fit Kit, # INK294
view full answer... - What Parts do I Need to Use the Inno Square Crossbars on My 2004 Subaru Forester with Flush Rails?Yes! I am happy to confirm that the following parts are compatible with your flush rails on your 2004 Subaru Forester: - Inno Square Crossbars - Steel - Black - 46" Long # INB117 - Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points # INTR - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR104 As far as the video that you mentioned, the reason why we do not have flush rails pictured in the demonstration video...
view full answer...
- 2022 Toyota RAV4 Inno Roof Rack Fitment with Kuat Grip Ski and Snowboard CarrierThe Kuat Grip Ski and Snowboard Carrier # GRR6B is compatible with square crossbars so if you can fit the 46" Square Crossbars # INB117 and Raised Rail Feet # INFR on your 2022 Toyota RAV4 raised rails you don't need a new roof rack system. Inno hasn't tested and approved your roof rack fit as of yet (March 2022) but the raised rail systems are pretty straightforward and universal so you should be able to get it to fit just fine especially since they list that foot pack and a shorter square...
view full answer... - Roof Rack Fit For 2005 Mini Cooper S HatchbackIndeed it is! There is one roof rack fit for your 2005 Mini Cooper S hatchback, which is from Inno and made up of the following parts: - Inno Square Crossbars # INB117 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit for Inno # INK118 - Short Roof Adapter Kit for Inno Square Crossbars # INJK This will work for your '05 Mini so you can carry accessories or gear on top, and the only other thing I recommend, since it is a square bar roof rack, is a wind fairing to help minimize...
view full answer... - Availability of Fit Kit for Thule 400 Roof Rack Legs on a 1998 Toyota CorollaYour Thule 400 support feet are old enough that there isn't a fit kit, however, The Inno Square Bar roof rack, parts # INB117, # INSUT, and # INK134 fit your 1998 Toyota Corolla and as long as your Thule crossbars are at least 46" long you can just use the feet and fit kit parts # INSUT and # INK134 to complete your roof rack system.
view full answer... - Roof Rack and Cargo Box Recommendation for 2000 Pontiac Grand AmTo mount the SportRack Skyline XL roof cargo box SR7095 on the roof of your 2000 Pontiac Grand Am would require a roof rack installed with crossbars that are spaced 21-1/2 inches apart. Since the roof racks for your vehicle like the Inno Rack part # INB117, # INSUT, # INJK, and # INK153 have a wider bar spacing of 28 inches this would not be the box to go with. So instead for a similar sized box that would fit you'd want the SportRack box part # SR7016 which would work really well. It's...
view full answer... - Kakak Carrier and Roof Rack Recommendation for 2009 Ford FocusThese foam pad kayak carriers like the part # RL100K10 are a great temporary solution, but if you are looking for a solid rack to use regularly on your 2009 Ford Focus you'd be better served by first installing a roof rack like the Inno part numbers # INB117, # INSUT, # INJK, and # INK571. Then you could use a J-style carrier like the # TH834 which will be very secure.
view full answer... - Roof Rack that Fits 2006 Mini CooperWe've been told that a new Thule roof rack fit is coming for the 2006 Mini Cooper and that the fit kit would be 145137 but the THKIT1366 that you referenced was the older fit for the vehicle and is not available. So what we can offer you that is similar is an Inno square bar roof rack that is a fit with part numbers # INB117, # INSUT, # INJK, and # INK118.
view full answer... - Roof Rack Recommendations for a 2002 Ford EscapeThule does not have a roof rack option for your 2002 Ford Escape. The feet in your picture are Tracker or Tracker II feet which are not made anymore and the fit kits that go with them are also being phased out. New components will be needed to add a roof rack to your Escape. If your Escape has the factory side rails that run front to back then the most cost effective roof rack consists of the following parts: Crossbars # Y00408 SL Adapter # Y03536 TimberLine Towers # Y33TR For a naked...
view full answer...
- Inno Roof Rack Recommendation for 2010 Nissan AltimaThe experience you described with the Sportrack is not uncommon and is why I never recommend them, for your 2010 Nissan Altima I would recommend the Inno Square bar roof rack part numbers # INB117, # INSUT, and # INK116 which we know fits really well and would not interfere in any way with your doors.
view full answer... - Are Inno Square Roof Rack Bars the Same Dimensions as Thule CrossbarsThe Inno crossbars of the roof rack you mentioned part numbers # INB117 and # INFR match the same dimensions as Thule crossbars at 1-1/4 inches wide and 7/8 inches tall. This rack will work with your Thule roof bike racks that are designed to fit square crossbars.
view full answer... - Roof Rack and Canoe Carrier Recommendation for 2001 Toyota CorollaYour best roof rack option for your 2001 Toyota Corolla is the Inno roof rack # INB117, # INSUT, and # INK134 which is a higher quality roof rack at a lower price point. Then for a canoe carrier the Yakima KeelOver part # Y04069 would be a really great solution to carry the canoe upside down.
view full answer... - Replacement Square Crossbars to Fit Older Thule 460 Podium Foot PackI do have some square bars that you can use with the older Thule 460 Podium foot pack, but none of the newer Thule SquareBars will fit with that older style. Instead you're going to need the Inno Square Crossbars. They don't offer 47" bars exactly but you can choose from the following to replace your Thule bars: 46" Square Crossbars - # INB117 50" Square Crossbars - # INB127 I'm also linking our selection of Inno Square Crossbars for you to filter through if you want to use something...
view full answer... - Recommended Cost-Effective Roof Rack for 2015 Subaru ForesterYou can see roof rack options for your 2011 Subaru Forester by clicking on the link provided. Just select the type of roof you have on the Forester - either raised factory-installed side rails or a totally bare roof - to see compatible racks. If you have raised rails the Inno square bar rack system made of parts # INB117 and # INFR is among the high-value options. This rack offers hardened steel construction and installs as shown in the linked video. If you have a bare roof your lowest-cost...
view full answer... - Will the Thule Tracker Feet Work On a 2007 Honda CR-VThe 2007 Honda CR-V uses the Thule Rapid Podium Feet part # TH460R, not the Thule Tracker Feet. There is no way to mount the Thule Tracker Feet on a Honda CR-V. In order to mount the Thule Rapid Podium Feet on a Honda CR-V you also need the Thule Fit Kit for Podium Style Foot Pack part # THKIT3042. The Thule Rapid Podium Feet will then work with any Thule crossbars with channels on the bottom like the Thule WingBar Evo Crossbars part # TH711220. It sounds like you might be trying to transfer...
view full answer... - Inno Fit Kit for a 2013 Honda CR-V with Square BarsIt looks like you have the Inno Square Bar setup on your old Scion. The fit kit you referenced, part # INK225, is not the one that is confirmed to fit your 2013 Honda CR-V. The proper part number for your fit kit is # INK413. These have the parts for the fit kit. Of course, I cannot confirm if this will work for you since I cannot 100% confirm that you have the square bar and the Inno Feet, part # INSUT. If this is the setup you have, then the # INK413 will work.
view full answer...
- Locking Roof Rack Recommendation for 2001 Toyota 4Runner with TracksFor your 2001 Toyota 4Runner with factory tracks we have the Inno square bar roof rack part numbers # INB127, # INSUT, and # INK143 that's a confirmed fit that comes with locks so it would be perfect for you.
view full answer... - Roof Rack for a 2005 Toyota Matrix with Naked RoofThe fit information is correct. SportRack does not have a roof rack fit for any models of the Toyota Matrix. The most cost effective roof rack we have available for your 2005 Toyota Matrix with a naked roof is the Inno # INB127 crossrails, # INSUT feet, and # INSU-K5 fit kit. This kit clamps securely to the roof and the standard round bars work with most accessories.
view full answer... - Can Inno Crossbars and Inno Feet Be Purchased Individually? No, the Inno Square Crossbars # INB127 and the Inno Feet for Square Crossbars # INSUT are only sold in pairs as Inno does not offer these items individually.
view full answer... - Square Bar Roof Rack and Compatible Kayak Carriers for 2008 Honda Fit SportFor your 2008 Honda Fit with a bare roof the Inno 50-inch square bar roof rack made of parts # INB127, # INSUT and # INK219 is a confirmed fit and will give you a sturdy cost-effective platform for transporting your two 50-lb kayaks. This rack has a 120-lb maximum weight rating and 28-inch bar spread. We have lots of choices in kayak carriers that fit on these square Thule crossbars and these appear on the linked page. You might care to check out the linked article on watersport carriers...
view full answer... - Roof Rack and Tie Downs to Carry Lumber on a 2014 Nissan JukeWhat I recommend is to add some load stops to the roof rack crossbars so that you can support the load side to side and use straps to secure the lumber front to back and tie off to the load stops. First you will need a roof rack for your 2014 Nissan Juke. The most cost effective roof rack that is a true custom fit is from Inno using square bars # INB117, feet # INSUT, and fit kit # INK399. Then for load stops I recommend # TH503 because they are designed to fit Tule square bars which...
view full answer... - Roof Rack that Fits 2007 Honda FitYes we have roof racks that fit your 2007 Honda Fit like the Inno Square Bar part numbers # INB127, # INSUT, and # INK219. I also attached a link that has all of the roof racks we offer for your vehicle as well.
view full answer... - Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4DrWe do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
view full answer... - Roof Rack Fit For 2013 Honda CrosstourI was able to find a roof rack that fits your 2013 Honda Crosstour, and in fact there are two, both from Inno. One is an aero bar roof rack and the other is a square bar rack. I'll list out the options for both, and I did verify these fits directly with the manufacturer for you. Aero Crossbar Roof Rack - Inno Aero Crossbars # INXB123-130 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK587 Square Crossbar Roof Rack - Inno Square Crossbars # INB127 - Inno Feet for...
view full answer... - Inno Roof Rack Compatibility With a 1998 Honda Civic Sedan With Factory Moon RoofYou can use Inno Square Bar roof rack on your 1998 Honda Civic with a factory moon roof, but you may not be able to open the moon roof with a load on the rack. For a complete roof rack, you will want the following parts: Square Crossbars # INB117 Roof Rack Feet # INSUT Custom Fit Kit # INK707
view full answer... - Roof Rack Fit for 2018 Subaru LegacyWe do have several roof rack fits for your 2018 Subaru Legacy, but the crossbar you mentioned is a fit for a 2016 Chevy Spark. For your Legacy, the most economical option we offer would be square crossbar rack from Inno, which would consist of the following parts: Square profile 54 inch long crossbars, part # INB137 Roof Rack Feet, part # INSUT Vehicle Specific Fit Kit, part # INK439 The downside to square bar roof racks is that they're not very aerodynamic, so they can be pretty noisy....
view full answer... - Load Assist Kayak Carrier for a 2017 Chevy VoltThe Yakima LongArm # Y01149 is designed to fit a 2 inch trailer hitch but the trailer hitches available for your 2017 Chevy Volt are all Class I, 1-1/4 inch hitches. But I do have another possible option for you. If your Volt already has a roof rack then you could potentially use the Malone DownLoader kayak carrier # MPG114MD with the Telos Load Assist # MPG351XL which will help you to load the kayak easier. I would just need more information about your roof rack if equipped such as the...
view full answer... - How to Mount Old Thule Square Bars to 2020 Toyota CamryThanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
view full answer...
- Roof Rack for 2013 Ford FocusRoof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
view full answer... - Roof Rack for 2007 Honda Fit Sport for Use with Thule Tandem Roof Bike RackThe best roof rack option at a price similar to the Rola is Inno's square bar rack made of parts # INB127, # INSUT and # INK219. This rack has a 28-inch bar spacing that is compatible with the Tandem and it has a 120-lb weight capacity when installed on your car. The Thule Tandem Roof Mounted Bike Rack # TH558P is compatible with round and square bar roof racks only so the Rola 59755 won't work because it uses wide elliptical bars. If you wish to add a cable lock to secure the bike to...
view full answer... - Parts Needed to Install Inno Square Bar Roof Rack on 2016 Toyota HighlanderThe correct Inno square bar roof rack components that fit your 2016 Toyota Highlander are # INB127, # INSUT, and # INK666. If you already have the square bars and naked roof foot kit you are correct you'd only need the fit kit part # INK666.
view full answer... - Inno Roof Rack for a 2009 Dodge Caliber SXTThe Inno Roof Rack that will fit on your 2009 Dodge Caliber SXT, with no existing rails or crossbars, will include the 50 inch Inno Square Crossbars, part # INB127, the Inno Feet for Square Crossbars, part # INSUT, and the Custom Fit Kit, part # INK555. The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well.
view full answer... - Roof Rack Options for Transporting Kayaks on 1996 Honda Civic HatchbackSince you intend to transport a kayak(s) on the roof of your 1996 Honda Civic Hatchback my suggested starting point is a review of your owner's manual to confirm how much weight the vehicle's roof can safely handle. If you cannot find this in your manual a local Honda dealership should be able to check this using your car's VIN number. Depending on that roof weight capacity, and the weight of your kayak(s), the very lightweight foam block type of kayak carrier may indeed be a good option...
view full answer... - Roof Rack For 6th Generation Honda Accord (1998) SedanThe sixth generation started with the 1998 model year per my research, so if yours is the sixth generation you'll need a roof rack that fits the '98 models. There is one option for that, from Inno: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK249
view full answer... - Roof Rack and Bike Rack Recommendation for 2016 Ford FocusThe best roof rack option we have for your 2016 Ford Focus is the Inno part numbers # INB137, # INSUT, # INK528 which gives you a higher quality rack at a much lower price than similar options and also includes locks whereas other racks do not include this. Then for a roof bike rack the Rhino Rack # RRRBC050 would be a great option as well that allows you to keep the front wheel mounted.
view full answer... - How to Fit Older Thule Square Crossbars on a 2015 Toyota Corolla Sedan Naked RoofThanks for reaching out! To utilize your older Thule square crossbars on your 2015 Toyota Corolla Sedan you'll need to use the Inno Feet # INSUT and their Fit Kit # INK306. The new Thule square crossbars have the slots on the bottom so they mount to different legs whereas the Inno square bars have the same design and dimensions as the older Thule square crossbars which is why these feet are compatible with your Thule bars.
view full answer... - Inno Roof Rack Fit on 2019 Chevy Volt With Naked Roof For Carrying a KayakYes, there is an Inno roof rack that fits your 2019 Chevy Volt with a naked roof that will allow you to carry a kayak. The roof rack you were referring to is made up of three parts - the bars, feet, and fit kit. The correct parts for your '19 Volt are the following: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK688 Then for the easiest loading of your kayak on the roof rack, I recommend a J-style carrier, which will allow you to load...
view full answer... - What Roof Rack is Compatible with My 2015 Toyota Camry's Bare Roof?For a great economic option that will securely fasten to your bare roof of your 2015 Toyota Camry LE, I suggest the following parts: - Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK872 With this roof rack system, you can leave the crossbars on after installation even when they are not in use. However, I recommend removing the...
view full answer... - Fitment of Inno Square Crossbar # INB127 System on a 2020 Honda HR-V with Bare RoofI calculated all the specs for you. From the roof rack you mentioned, I assume you have a bare roof on your 2020 Honda HR-V. If this is the case, then yes! You will be able to use the the following roof rack setup with the Trunx # TRX44FR and the Malone Pilot # MPG2103 side-by-side: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black # INSUT - Custom Fit Kit # INK878 I went ahead and attached a video of this roof rack attached to a 2016 Fiat 500x. Even...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.