Fuse Bypass Switch Recommendation for a 2014 Honda CR-V  

On your 2014 Honda CR-V, when your remove the key you will need to go through the entire process again. I've attached the photo of the owners manual page to assist. This will help you to circulate the fluids and allow the vehicle to be towed…

I took a look in the owner's manual for a 2012 Honda CR-V and it states that if you will be towing for more than 8 hours in a day you will need to remove the 7.5 amp accessory radio fuse and 7.5 amp accessory key lock fuse. These fuses should…

For the 2014 Honda CR-V we have found that you will want the part #RM76512 which allows you the easy ability to kill two circuits. We have found that circuits 19 and 20, ACC radio fuse and ACC key lock, on your vehicle need to be killed when flat…

If you look in the owners manual for your 2013 Honda CR-V it will tell you what fuse to pull and where it is located so you can flat tow your CR-V. From what I could find it is the accessory radio fuse that has to be pulled from the interior fuse…

When it comes to the procedure for a specific vehicle for flat towing you have to go with what the manufacturer recommends. Either by what's in the owners manual or by contacting the manufacturer of the vehicle. Based on what you listed you would…

We have everything you would need to flat tow your 2014 Honda CR-V. First lets start with a base plate kit as that is the attachment point on the vehicle. For that you would want the Blue Ox Base Plate kit part #BX2258. I attached an install video…

Yes, even with the battery charger installed when you are flat-towing your 2012 Honda CR-V you would still want the fuses removed. The charger will help keep the battery in good shape but the with the fuses left installed the battery would still end…

Although we have wiring harness options that will work for your truck, the Hopkins #HM56009 taillight harness for towed vehicles wouldn't work for your 2021 Ford F-150, it only fits up through the 2020 model year. I'd recommend using a diode…

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

There are a number of parts you're going to need in order to flat tow your 2014 Honda CR-V, starting with compatible base plates. I recommend the Roadmaster EZ4 Base Plate Kit #RM-521567-4 due to the clean look they'll give your Honda. For a…

Page 236 of the owners manual for a 2013 Honda CR-V states for extended towing you will need to remove the 7.5 amp accessory radio fuse located in the interior fuse box. This fuse should not be too difficult to pull but if you wanted to use a fuse…