DIY 2014 Honda CR-V Installation for the Brake Buddy Stealth Supplemental Braking System Video

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

For installation of your Brake Buddy, #HM39524, you can route the wires through a grommet that is already being used for the factory wiring. I suggest you look underneath the brake fluid reservoir to the driver's side to locate a good option;…

The 3/8" bolts in the Blue Ox Base Plate Kit #BX1689 will need to be torqued to either 33-lbs/ft (Grade 5 Bolts) or 47-lbs/ft (Grade 8 Bolts). A Grade 5 bolt with have 3 radial lines on the head of the bolt, where a Grade 8 bolt will have 6…

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

After taking a look at the instructions for the Blue Ox Base Plate Kit - Removable Arm part #BX2679 and the Westin Sportsman Grille Guard part #40-3985 and others like it. They are not compatible together. Unfortunately, they use the same attachment…

Yes, the the Roadmaster Tail Light Wiring Kit with Bulbs, #RM-155 can be used with the Brake Buddy Classic 3, #HM39494. We actually have an install video created for the Brake Buddy Classic 3, #HM39494, see link below. This is located on the product…

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

Yes, if you wanted to cut off the 4-way connector of the Hopkins tail light wiring kit part #HM56304 and wire it to a 6-way like the part #C92FV you certainly could.

The fact that your motorhome has a Diesel engine won't have any bearing on the parts you need to correct the problem you're experiencing. In order to flat tow your CR-V without discharging the battery, you'll need to remove the 7.5A fuse…

The Replacement Breakaway System for Brake Buddy Classic and Select Supplemental Braking Systems part #HM39340 replaces the brake away switch for the brake buddy Classic II, Select II, Classic 3 (#HM39494), and Select 3 (#HM39524). We have not yet…

It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System #HM39494. I cut out some pages from the instruction manual for you to check out, but what you'll do is actually…

You would not have to reverse the installation of Hopkins tow bar wiring harness #HM56304 for the vehicle lights to work on your 2014 Honda CR-V when it is not being flat towed. The harness plugs in line with the tail light wiring so when you are not…