Sensor Interference with Installation of Curt Trailer Hitch Receiver on 2021 Ford Mustang Mach-E  

I'd recommend the US made Curt Class III hitch, part #C77ER. Ford doesn't recommend towing with your vehicle, but using a hitch as an attachment point for a bike rack would work just fine.

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite…

Thank you for your purchase of the EcoHitch Hidden Trailer Hitch Receiver #306-X7192 for your 2014 Toyota Prius v! Both the Kuat Sherpa 2.0 #SH22G and the Kuat Transfer V2 #KU84FR are excellent bike racks but for what you're looking to get…

There are a couple options currently available for the 2021 Ford Mustang Mach-E. There is the Curt Trailer Hitch Receiver, #C77ER and the Draw-Tite Max-Frame, #DT92MR. Each of these options install in a similar way and do so without the need for…

It sure will! The Draw-Tite Max Frame Trailer Hitch Receiver #DT92MR you were looking at was designed specifically for the 2021 Ford Mustang Mach-E. This hitch has a 350lb tongue weight rating and 3500lb trailer weight rating making it a perfect…

That's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt #C77ER and Draw-Tite #DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt Trailer Hitch…

The Draw-Tite 76460 hitch which we offer as part #DT92MR is a fit for your 2021 Ford Mustang Mach-E, but the trailer wiring is sold separately as part #C59236.

The hitch that would limit access to the hands free liftgate option of your 2021 Ford Mustang Mach-E the least would be the Curt part #C77ER as there is a bit less material around the hitch tube compared to the Draw Tite #DT92MR. With either option…

Unfortunately, it does not appear that you can install a traditional aftermarket roof rack on your Ford Mustang Mach-E. It does not matter if you have the 2021 or the 2022. There is one option left, if you prefer carrying your items on the roof of…

As we haven't had the chance to install either the Curt #C77ER or the Draw-Tite #DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit…

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…