Replacing a Lippert Axle With a Dexter Axle 8327872
Question:
I have a lippert axle, same axle rating wondering if my hubs will fit the dexter axle. Sent a picture of the manufacture sticker with info about axle. Thanks
asked by: Ryan
Expert Reply:
From what I could find out about the axle you currently have, The Dexter Axle # 8327872, should work. That being said, it is highly advisable to double check a few things before biting the bullet.
First, this axle utilizes the inner bearing # 25580 and the outer bearing # 14125A. You will need to double check your current bearings to confirm your hubs will fit properly.
Second, the 94 and 78 in the string of numbers and letters most likely refers to the measurements, but it definitely wouldn't hurt to double check. From center to center of the spring seats, you will need to make sure you get 78 inches. The 94 for would refer to the measurement from hub face to hub face of 94 inches.
If all this matches, then you are good to go with the Dexter # 8327872.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 78-1/4 Inch Long
- 94 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Shop: MORryde Cushioned 5th Wheel Pin Box for 11.5K to 14K Trailers w/ Lippert 1621 and 1621HD
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Replacement Trailer Hub Bearing - 14125A
- Shop: Furrion Marine Speaker - Recessed Mount - 5" Diameter - 30 Watts - Black - Qty 1
- Search Results: bathroom fan
- Search Results: cushioned pin box
- Search Results: moryde
- Search Results: rv outdoor speakers
- Q&A: MORyde Cushioned 5th Wheel Pin Box Replacement for Lippert 1621
- Q&A: Upgrading to a MORryde Cushioned Pin Box On a 2021 Grand Design Reflection 303RLS
- Video: Redline Trailer Suspension 126B2 Review
- Shop: MORryde Cushioned 5th Wheel Pin Box for 18K to 23K Trailers w/ Lippert 1621SHD
- Search Results: 25580
- Search Results: 25520
- Search Results: 14276
- Shop: Replacement Race for 25580 Bearing
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Common Torque Specifications for Lug Nut Size
- Q&A: How Many Bolt Holes Are Needed for a Lippert 1716 Pin Box
- Q&A: How To Determine What The Bolt Pattern Of Your Trailer's Pin Box
- Q&A: Can a Pin Box on a Fifth Wheel Trailer Be Raised to Lower Nose of Trailer
- Video: Review of Lippert Electric Drum Brakes - LC46WD
- Video: Curt TruTrack Weight Distribution Installation - 2014 Chevrolet Silverado 1500
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring