Roof Rack Includes:
Part Numbers: RRVA137B-2,RRRLKVA,DK228
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Specs:
These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).
Durable nylon legs with built-in locks help mount Vortex Aero crossbars to your vehicle's naked roof or fixed mounting points. Leg bases pivot to level bars on your roof. Pair with 2 crossbars and fit kit to create complete roof rack.
Features:
Specs:
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (8237 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Durable nylon legs with built-in locks help mount Vortex Aero crossbars to your vehicle's naked roof or fixed mounting points. Leg bases pivot to level bars on your roof. Pair with 2 crossbars and fit kit to create complete roof rack. This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.I am very happy with my purchase of the 2500 Series Rhino Roof Rack system from etrailer. I wanted to transport a Mohawk Intrepid 16’ canoe from Pagosa Springs to my home in Albuquerque that my good friend left me when he passed. We used to run the Chama River from El Vado Dam to just short of Big Eddy, a great overnight trip of 22 miles. I didn’t know what I needed in a roof rack for my Toyota Tacoma full cab but Alyssa at etrailer was very helpful and so pleasant. The delivery was quick and the installation was pretty easy (the videos on etrailer’s website were a big help). The day I drove from Pagosa to ABQ, Feb 26, 2023, it was very windy, 40 mph gusting to 60 mph! Not an ideal day to be carrying a canoe on the roof! But the Rhino Rack was rock solid and the canoe didn’t budge, even though my truck was getting getting pushed around. I’ve left the rack on because I like the way it looks! (PS. I added another strap to the back rack after I took the photo) Highly recommend etrailer to anyone considering purchasing a roof rack!
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
Hello, I am having a problem with a part of the legs for my crossbars. The Bolt and its rectangular metal plate that holds the leg onto the crossbar is stripped. I used this product last year during the summer. The crossbars were taken off during the winter and stored. I went to replace them on the car yesterday and found these parts to be stripped. I can't use the crossbar without an new piece. I need customer service to ship me out a new bolt and plate.
The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
Look how nice my crossbars look? I ordered these and paid extra for expedited shipping so that I could have them to put a luggage carrier on my roof. The legs for the crossbars never showed up and the crossbars came late as well. I ran out and got a trailer hitch basket for extra storage. Tack on an extra $[XX] in addition to the extra $$ for fast shipping and I'm $[XX] into these crossbars that I couldn't use for their intended purpose. I called early enough that the company could have overnighted the legs but they just kept blaming UPS. Very disappointed.
Great strength and look. I love em. About to put on the kayak racks and get some fishing going.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
Today I installed roof Rack I take pictures send to you ,what is roof rack on the my car?good or bad let me know thanks you
Good price. Came quickly. Although one of the cross bar boxes was open when delivered, everything was complete and undamaged. Be sure to check inside the cross bars for the rubber strips!!
I own a 2013 Honda CRV I purchased a couple months ago. It has a naked roof and no rack or side bars, and I wanted to be able to carry up to three kayaks. I didn't really want to buy and install the side bars, and then the cross bars also. I also needed the cross bars to be a little wider than the vehicle itself, as I own two Ocean Kayak Scupper Pros, and a Venus.
This Rhino Rack package looked like a great option for my needs. Weight wise, the three boats come right to the limit. Other racks had lower weight limits, and wouldn't work.
I had a couple issues with the initial package, but etrailer took care of the problem right away, and sent out what I needed.
Installation was pretty smooth. I recommend reading and rereading the instructions, before you cut anything. The videos on the etrailer website or directly on YouTube are very helpful to see all the steps. I'd like to see more personalized instructions added in the future, just to to make everything even smoother. Make sure you identify your vehicle and the bar you received on the kit instructions before you start.
These bars are so wonderful. The aero bars make no noise when driving and no whistling that I can tell. They don't seem to effect my gas mileage. I made sure the top rubber strips and bottom measurement strips were cut perfectly with no gaps, as this is important to prevent whistling.
They look so stylish. I get complements on them, and people can't believe they are after market, and that I installed them myself. They really complement the vehicle. Once installed the first time, I can take them off or put then back on in about 12 minutes. I don't really plan to take them off though. I don't use car washes, and I like the look of them on my vehicle.
I made sure to not overtighten them, and then tightened them a few times over the next week and with a couple kayaking trips. These babies are strong and I can't make them move when I test them. I still check them regularly to make sure they are secure, for safety purposes.
I highly recommend this Rhino Rack package. They know how to make the perfect roof rack and you can tell the quality and thought that went into them. Look at my photos I have included.
Thank you to etrailer for such great service. You made the whole process so pleasant and easy.
etrailer.com's videos and additional customer support made the purchase of a Rhino Rack system from them for our 2010 Malibu a no brainer. The rack fit the car perfectly, and with the videos and clear instructions that came with the kit, I got it installed on the car with only one misstep. The instructions came the the measurements in centimeters and inches. I didn't have a metric tape measure, and ended up messing up converting fractions to decimal.
My Daughter is going to college 500 miles away and is moving into an unfurnished apartment and needed to pick up some small furniture that wouldn't fit in her Malibu. She purchased several items from Facebook Marketplace and was able to transport a twin bed and mattress, a medium sized desk and some dining room chairs (in several trips) with no problems.
The only thing I can think of to improve the installation would be to have the Inches measurements in decimal or to include an inexpensive metric tape.
Bought this rack to carry canoe, etc. while towing our camper. Installation is easy with one person so long as you take your time to get the original setup meticulously correct. If you're planning to put it on only occasionally when you're using it, it's 10 to 15 minutes for one person to install once the original setup is done and the clamp points marked with the little unobtrusive stickers they send with the kit. Originally planned to put it on only when using because we only really need it a couple times a year (we just throw the canoe in the back for local trips). Looks good enough we might leave it on all the time. Even thought I didn't know I needed it until I was already at the store, it certainly came in handy bringing home a 10 foot long 2x8 on a rainy day when I needed to keep the bed cover closed. etrailer's service was prompt and flawless as always.
Holds two kayaks on the roof rock steady. Did some highway miles, back roads, bumpy roads, all locked in place. The problem is that when there are no kayaks up there, the wind creates a very loud whistle sound that grows with the speed. Its gotten so bad that we tend to avoid using the car these are on for anything but driving kayaks around. Probably going to have to remove them for daily driving and put them on again when its kayaking time.
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
The racks fit perfectly! They are a great fit to my car. They don’t interfere with the sunroof’s operation. I assembled it on my own with no difficulty. It was easy to assemble. The directions it provides to you are easy to follow. The only down side was getting the plastic pieces to lock on the ends of the bars. Other than that they are great and they look great on my car! I plan to use them to transport kayaks! They are very sturdy and very trust worthy for transporting a couple of kayaks. I recommend these racks to anyone who has a 2016 or 2017 Nissan Altima!
Great rack for a great price. I tried an Amazon knock off, and that was a piece of junk. The Rhino rack is relatively easy to install, is very secure, and has lots of accessories.
The installed rack has done the job well and after installing and breaking down after one ski season and then reinstalling for the next season, no issues or problems to report. Everything has worked out great.
Not too hard of an install and it looks great! Highly recommend for a basic utility roof rack for your 23 Tacoma.
Really nice on my toyota tundra rhino rack look how cool is it thanks you so much
The rack was easy to install and after some adjustment, it holds well to the roof. It is well made and strong. It holds my light rack on very well at high speeds and hard cornering. Conclusion, its a great rack for a vehicle that doesn't have factory rack mounts. Installation will go easier with a friend to help.
These ar ok. The design is silly because you can get your hand under the door and easily rip it off plus one just fell off on the highway.
I bought the complete set (mounting points, mounts and aero cross bars) looking for a less expensive approach for a rack to carry my sea kayak. The equipment shipped quickly from or via etrailer. The instructions that came with the whole kit leave a little bit to be desired and a little bit of mechanical interpretation is needed to figure out what parts you need and which you don't. The whole set went together relatively easily in an hour or so. I remove the bars, mounts and mounting points when not in use which is a bit time consuming and fiddly. I had to replace the mazda 3's roof moulding which was continuous with one that had the necessary pop out pieces to accept the rack but this was not costly nor a big job. Overall, I am pleased with the rhino rack and it looks just fine. The one area it could be improved is wind noise - at some speeds there can be quite a heavy drone either off the bars or mounts. The bars do have rubber inserts to smooth out the surface across the width of the car. I suspect it might be the mounts which have the inboard side of them completely open so the air flowing along the car goes over this open space like you would have happen when you blow across the top of a bottle. I am going to try to cover the sides with gorilla tape to see if this makes a difference. Apart from that, I am quite happy with the etrailer ordering, delivery and the Rhino rack in general.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2013 Lincoln MKX
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.