Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your Ford F-150 and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.
Features:
Specs:
Heigh ho, it's off to work you'll go with this elevated truck bed rack. Get 500 lbs of raised cargo-hauling capacity to go with your truck bed storage. Use the rack for work and haul ladders, lumber, pipe, and rebar. Or take a break from the mines and use your Adarac for play, strapping on kayaks, canoes, skis, snowboards, or hunting equipment.
Adarac is compatible with Access tonneaus and other inside-the-rail truck bed covers, so it gives you added hauling capability without sacrificing your covered truck bed storage.
The Adarac truck bed rack is tailored specifically for your vehicle. The streamlined, tapered rack sits neatly behind your cab, and the top rails extend above your roof to allow you a clear rear view. The black powder coat finish helps to protect the rails and uprights, and the rustproof aluminum crossbars won't chip or fade. This rack will look great even after years of use.
2 Slotted utility rails run lengthwise along your truck bed rails, giving you lots of tie-down options for securing a load inside your truck bed. Safely lash down your elevated cargo using the overhead crossbars with integrated mounting channels. The built-in channels are located on the underside of each crossbar and allow you to secure your accessories. Tie-down slots at the top of each vertical upright bar provide additional tie-down points.
This truck bed rack is fully adjustable along the length of your truck's cargo area. You can adjust the uprights according to the size of the load: unbolt the upright bars to spread them apart for long loads or to move them closer together for shorter cargo.
The Adarac easily bolts on to the top of your vehicle's bed rails using stake pocket inserts - no drilling or welding is necessary. And you can remove the rack whenever you need to. So even if you don't want to whistle while you work, the Adarac custom truck bed rack makes transporting your equipment quicker and easier.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (22 Customer Reviews)
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.I installed the rack this morning with no issues. Simple process that took about an hour only because I am picky about everything being square, even and perfectly placed. I was surprised that the unit was as heavy duty as it is. I was expecting something much lighter in gauge of steel. It sits very sturdily on the truck with zero movement. Even my wife thinks it looks rather stylish (neither of us wanted the work rack look).
Thanks for the great service and follow up after the sale to let me know it had shipped, you received notification of delivery, and how I liked the product and install. I've learned through experiences that this is the kind of service one can expect from etrailer.com.
I bought the Adarac Aluminum Crossbar Series Ladder Rack a year ago to use for hauling kayaks and it has worked well. It is sturdy, was easy to install, and looks decent on my truck. The paint has held up well. I was able to haul my kayaks from Pennsylvania to Florida and back with no problem. People have stopped me in parking lots asking about the ladder rack. I got a quality product at a reasonable price. The only negative thing I'll say is the ladder rack whistles sometimes. This happens when you get a strong crosswind but the noise is tolerable.
Used it heavily the last year. Held up my rooftop tent during my entire month long roadtrip. Easily held over a thousand pounds of weight. Comes off quick if you need to use the whole bed of your truck.
Well packaged by shipper and no damage occurred to the racks during shipping. Easy to install and solid product. I had to slightly modify to fit my roll back by grinding about a 1/4" off the box side of the rails. If not for the need to use a grinder on these install would've taken about 15 minutes. No big deal either way. Looks good and these racks will do what I need them to..... Haul Ladders. Next I will be installing the rack em racks on my enclosed trailer.
Super easy to install, very sturdy! I found that it worked great for my canoe! I especially love the adjustability of the rack, and all the tie down holes in the base rack for bungies. I wrapped some pipe wrap up top, and used some C-clamps to customize... or you can pay big time for the yuppie version. This is better than the 1 x 2 / 4 x 4" lumber redneck version, and a lot cheaper than the brand name rig. I highly recommend!
This rack works awesome for hauling our two kayaks while towing our camper. Very easy to put on and take off. Highly recommended.
very good rack. I have a rolling tonneau cover on my truckbed and had to modify the rails that partially covered the stake holes. Once done, it fit it well and now I can have secure materials in the bed and oversize on the rack. Strong and stable.
Chose this rack because it is compatible with the Access Lorado Tonneau Cover. The rack is very well made and simple to install and remove, which I do often due to fifth wheel towing. I use this rack often for ladders and canoes, as well as long length construction materials. Etrailer is lightning fast with shipping, customer service is great and their prices, including free shipping, cannot be beat. Very satisfied with Etrailer and the Adarac!
This Ladder Rack mounted easily on my 2017 1500 Silverado and allowed full use of my roll up metal bed cover. It looks stylish and easily handles my 16 foot canoe. Installation was easy and the rack is easily removed when not needed and the side rails make great tie points for securing cargo in the bed.
Best ladder rack I have ever purchased, hands down. Better than the TracRac, and only half the price. Quality is by far better than any other. Easy set up and take down. Wish I would have bought this one years ago!!
Great service. Excellent product.
We have had our Adarac for a year now.
A great product and very versatile from carrying overhead equipment to tie downs for ATV's.
Awesome product. Very sturdy. Will work with Backflip G2 cover installed
Very well built and easy to install. Looks much nicer the the tubular rack on my old truck. I love that I can use this with my tonneau cover.
easy to install, looks good. carries my kayaks just fine. a cushion for the cross rails would be a nice option. I used pool noodles wrapped with iron pipe wrap
Excelent , Perfect for 2 kayaks, several ladders and lumber. Also evry easy to take down when I need them off.
Great product, sturdy and installed in about an hour. Would definitely purchase again.
Good product, very sharp edges on top bars though, be careful!
I have no complaints, love it!
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.