Ladder Rack

Select Year

Ladder Rack

Custom fit Ladder Rack for your:



Available Years for Ladder Rack


Ladder Rack

Adapt your truck or van to carry longer cargo with a ladder rack by DeWalt, Karrite or Thule. DeWalt ladder racks are made to handle the toughest jobs with a sturdy all-steel construction and features that make it the easiest truck bed ladder rack to use. Karrite models feature all-steel construction and are adjustable to ensure you get the perfect fit for your Vehicle. Thule ladder racks feature high-strength aluminum and an aerodynamic design to reduce wind drag. All of our ladder racks feature ease of installation and use, whether carrying a long load or removing a load bar to accommodate tall cargo. You can carry the gear you want the way you want without sacrificing the appearance of your truck or your budget.

We offer ladder rack systems for many popular truck and van manufacturers including Ford, Chevy, Nissan, and GMC. Find the right fit for your vehicle by entering the year, make, and model to the left.




What our customers are saying:

Outstanding service!

Lewis

Hayes, VA






Ladder Rack Manufacturers



Ladder Racks Accessories





Ladder Racks Videos

Thule Ladder Racks Review - 2015 Ram 1500

Today on our 2015 RAM 1500 Quad Cab we're going to be installing the Thule Xsporter Adjustable-Height Truck Bed Ladder Rack and that is part number TH500XT. We already have our ladder rack pretty much fully installed on our truck but we wanted to show you the last clamp before it goes on. We've got all the parts laid out here. It's going to come with four of these rubber pads that will go underneath the feet of the rack, one for each foot. It's also going to come with eight of these clamps, two for each foot but each side is going to have one with this extra bracket and this is for the lock which you'll put each side, one for each bar. That lock, which is this piece here is just going to slide over the top there, secures with this key which is included and that's going to cover this Allen bolt so no one can take that off and leave with all your stuff. It's also going to come with eight of these little flanges that will go over the bolt to disperse that pressure as this gets tightened down so it doesn't cause any damage to your bed lining or your truck itself. It's just going to disperse that weight a little more evenly. With that it's also going to come with these two Allen bolts, this larger one is going to fit the bolt for the clamps as well as we come over here to the actual rack.


TracRac TracONE Ladder Racks Review - 2015 Ram 1500

Today on our 2015 Ram 1500, we're going to be doing a test fit of the TracRac TracONE Bed Mounted Ladder Rack System, it'll be part number TA2700-01. As you can see, we got it laid out here on the table and we already have one installed so you can see what it looks like in the bed of the truck. We're going to go about putting it altogether and installing it on the truck and I'll go through the parts. For each rack, you're going to have two rubber strips that are going to go underneath of the ends against your bed rail in case if you have a naked bed rack or bed rail and you don't have any caps or a bed liner. That way it protects your paint. Then, you're going to have your clamps, your C-clamps that will go over the ends, and if you look down here, I'll show you just how they go on. You'll have a flat piece here and then you'll have your C-clamp, normal style, but you'll have to set it above three threads up, place it over the bed rail before the rack, place the end on, and then slide it under the bed rail and where it meets up. I think it'll thread it in. You'll have two clamps for each side and then also I'll go over how to adjust it.


Thule Ladder Racks Review - 2012 Ford F-250 and F-350 Super Duty

Today on our 2012 Ford F-250, we'll be doing a test fit of the Thule Exporter Pro. This is going to be your bed-mounted ladder rack system, with a 450 pound weight capacity, and be sturdy aluminum constructed. As you can see up top, you also get your stops for your cargo. Those are steel brackets with a twist knob to tighten then down. These are fully adjustable with height, and simply to do that, all you're going to do is get your measure for the top peak of your cab down to your bed. Then I'll tell you on the inside of these, if we can turn to that one right there, you'll see all the numbers here. That will be however tall it is.


TracRac TracONE Ladder Racks Review - 2012 Ford F-250 and F-350 Super Duty

Today on our 2012 Ford F250 we're going to be doing a test fit of the TracRac TracONE. This is going to be your bed-mounted ladder rack system, part number TA27000-01. As you can see we've already got it up here mounted into our vehicle. I'm going to go through how to put it all together and get it fitted to your particular vehicle. If you look up top you'll see the caps on the end. They will come off. They'll come off by loosening up this Alan bolt that's right here inside this rail.


Rola Ladder Racks Review - 2015 Ram 1500

Today on our 2015 Ram 1500, we'll be doing a test fit of the Rola Pick-Up Bed Ladder Rack System. This is going to be part number 59742. I'm going to show you how to put it together and get that last one on here. As you can see up here on the ladder rack, we've already fit it to the bed width. Simply to do that, all you'll need to do is loosen up these and make sure you take off the end cap with your key. Then you'll be able to adjust it from side to side to fit whatever bed width you have. You can see the front one's already on here.




TracRac SR Sliding Truck Bed Ladder Rack Installation on a 2008 Ford F-150

Today a 2008 Ford F150 Super Crew Cab we're going to install part number TA21508-02-02. This is a tracrac SR sliding truck bed ladder rack with the over the cab extension. Now, first step to get our truck ready so we can install is to install our base rails. Base rail has a hole in it that lines up with the stake pockets that are in the truck. There are stake pockets here and there's one up towards the front here. However, on our truck there's no covers for the stake packets.


TracRac Truck Bed Ladder Rack Review

Today we're going to review part number Ta37003. This is a TracRac Pro2 Truck Bed Ladder Rack. We have our TracRac already installed on a truck to give you an idea of what it looks like. Now we have our rack spaced out as far as possible, but you can move it together or as far as needed as long as you maintain the minimum spacing required for the clamps. As you can see, the rack only clamps into place. There's no drilling required. Also, the kit comes with an additional clamp if you want to use it for a toolbox mount. Basically, if you want to add a toolbox on top of the clamps, you would put this in place, open the additional clamp.


Articles about Ladder Racks



Ladder Racks Questions and Answers

  • Roof Rack Options for a Pop Up Tent Trailer
  • You are correct, the Sportrack Tent Trailer Roof Rack, # SR1020, will not work if the trailer roof has rounded edges. What you need is a system that comes with tracks that mount to the top, flat part of the roof. Take a look at the Rhino-Rack Roof Rack System, # Y01-120. The tracks with this system are 63 inches long. You also get 4 feet and 2 load bars. Make sure to check the trailer owners manual or with the trailer manufacturer to make sure that the trailer can be fitted with a roof...
    view full answer...

  • Compatibility of TracRac G2 Sliding Ladder Rack with Tonneau Cover on 2010 Tundra with 6.5 Foot Bed
  • The particular type of tonneau cover you have on your 2010 Tundra will determine compatibility of the TracRac G2 Sliding Ladder Rack system, part # TA21611-02. If your tonneau attaches to or covers the bed rails on the Tundra then the G2 system will not work. The G2 uses T-track base rails that run along the full length of your bed rails; these are the mounting points for the sliding uprights. Please refer to the photo provided which shows the G2 base rails. Some covers, like the...
    view full answer...

  • Fit of TracRack # TA21610-02-02 on 2015 Tundra Dbl Cab w/6.5 bed
  • According to my TracRac representative, the # TA21610-02-02 Sliding Truck Bed Ladder Rack w/ Over the Cab Extension is indeed a fit for the 2015 Tundra with a 6-1/2 foot bed. You'll need to use a chest style toolbox, because the slide system of the ladder rack would prevent you from using a crossover style. The DeeZee Red Label truck bed toolbox, part # DZ8560 in silver aluminum diamond plate would work well. The box measures 60 inches long (side to side), 19 inches wide (from front...
    view full answer...

  • Recommend Rhino-Rack Roof Rack System For Truck Camper Shell w/ Carpeted Ceiling
  • I do have a roof rack system that will work on the camper shell on your 2005 Ford Ranger, but you will not be able to use the Rhino-Rack Roof Rack Track Mount, part # Y06-560. The representative at Rhino Rack informed me that you would need to piece together a rack to use on your camper shell with carpeted ceiling. First you will need the Rhino-Rack RT-Style Roof Rack Tracks, part # RT16. This track system attaches to your camper with rivets. You will need to order a quantity of 2 of...
    view full answer...

  • Roof Rack Recommendation For Jayco Popup Camper
  • We have a couple of racks that may work for the top of your Jayco popup camper. I recommend the SportRack Pop-Up Camper Roof Rack, part # SR1020. This features telescoping crossbars that can be adjusted to lengths of 80, 83, or 86 inches. This rack has a weight capacity of 200 lbs. This will not fit trailer roofs with rounded or curved edges. Another roof rack you may want to check out is the Swagman Roamer LT Roof Rack, part # S80510. This system is not designed to be used with plastic...
    view full answer...

  • Using a Ladder Rack and Toolbox at the Same Time on a 2014 Chevy Silverado
  • With the Detail K2 ladder rack installed, # K2TFR150, the clamps that hold the base to the truck bed would get in the way of a toolbox. What could possibly work for you is Rola rack # 59742. If you where to clamp the front part back behind the toolbox it could work.
    view full answer...

  • Installing Rhino-Rack Fixed Roof Rack System, Part # Y03-320B, on Truck Cap w/ Carpeted Headliner
  • My contact at Rhino-Rack confirms that the main reason this item, part # Y03-320B, is not specified for roofs with headliners is that the carpet/liner can make drilling a bit more difficult. The same holds true for part # Y05-460, the Rhino-Rack Fixed-Mount Roof Rack System w/ 2 Sportz 44-Inch Crossbars. Certain carpet types might become caught up in the rotating drill bit or the drill chuck and unwind, causing cosmetic damage to the carpet. (Think of a sweater with a stray thread,...
    view full answer...

  • Will TracRac TracONE Fixed-Mount Truck Bed Ladder Rack # TA27000-01 Fit 2014 Toyota Tacoma 5-ft Bed
  • According to my contact at TracRac their TracONE Fixed-Mount Truck Bed Ladder Rack # TA27000-01 will fit your 2014 Toyota Tacoma with 5-foot bed if used along with the Tacoma Mount Kit # TA34000. This system offers near-universal fit on a variety of trucks and includes heavy-duty tie-down loops and lightweight powder-coated aerodynamic aluminum crossbars. The rack is USA-made and carries a limited lifetime warranty. We also offer Aluminum Load Stops # TA25110 for use with this system. I...
    view full answer...

  • Will Thule SUP Taxi Stand-Up Paddleboard Carrier # TH810 fit on Rola Truck Bed Ladder Rack # 59742
  • Yes, the Thule SUP Taxi Stand-Up Paddleboard Carrier # TH810XT can install on the Rola Truck Bed Ladder Rack # 59742 that you referenced. I attached review videos for both products for you to check out as well.
    view full answer...

  • TracRac G2 Bed Rail Dimensions for a 2012 Ford F-250 or F-350 Super Duty with 8 Foot Bed
  • The base rails for the TracRac G2 Sliding Truck Bed Ladder Rack, # TA21010-03, measure 97 inches long, 4-3/4 inches overall width, 2 inches overall height, 1-1/2 inches height at center, 1 inches wide rails at top and sides and 1-1/2 inches between the two top rails. This Ladder rack system is designed for 8 foot bed trucks. I added a photo with the dimensions I listed above for you. If you have a specific dimension that you need and I did not provide, please let me know I will be glad...
    view full answer...

  • Ladder Rack and Tonneau Cover Recommendation for a 2013 Ram 2500 Short Bed
  • I have a ladder rack and tonneau cover combination that will work for your 2013 Ram 2500, however, TracRac discontinued tonneau cover option for the TracRac ladder racks. Instead, I recommend looking at the Adarac Ladder Rack by Access, # A70480. This ladder was designed to fit the short bed models of the 2013 Ram 2500 and it is compatible with inside-the-rail tonneau covers. For an inside-the-rail tonneau covers, I recommend looking at either the Access Vanish Soft, Roll-Up Tonneau...
    view full answer...

  • Compatibility of TracRac G2 Sliding Ladder Rack # TA42000-01 with 2015 Toyota Tundra 5-1/2-foot Bed
  • I checked with TracRac concerning compatibility of their G2 Sliding Truck Bed Ladder Rack # TA42000-01 with your 2015 Toyota Tundra Crewmax 5-1/2 Foot Bed with the Deck Rail System. This particular ladder rack is not a fit for your truck. However, we do have a TracRac sliding rack option that will work just fine in your 2015 Tundra Crewmax. The TracRac SR Sliding Truck Bed Ladder Rack # TA21611-02 is confirmed fit for your Tundra Crewmax with the deck rail system. This rack installs...
    view full answer...

  • Will the TracRav TracVan Triple Ladder Rack Fit on a 2004 Chevrolet Express Van 2500
  • Yes, the TracRac, TracVan, Triple Ladder Rack, # TA29056, will fit on your 2004 Chevrolet Express Van 2500. Your G series van requires the use of the Gutter Spans, supplied, which are designed to span the putty filled rain gutter for maximum strength. Refer to installation B in the instructions linked here for you to review. You will also need to add shims to compensate for the curve in the gutters on your 2004 Chevrolet Express Van. The shims are also included with the TracVan,...
    view full answer...

  • Will TracRac Pro2 Ladder Rack Fit 2013 Toyota Tacoma with In-Bed Track System and Composite Bed
  • The TracRac ladder rack # TA37004 will fit your 2013 Toyota Tacoma with the in-bed track system you have and the composite bed. The rack comes with special clamps that will fit in the channels of the Toyota track system. I have included a picture showing what the clamps look like. I have also included a link to the installation instructions for you.
    view full answer...

  • Roof Mounted Crossbars for Jeep Wrangler Unlimited Hardtop
  • The Rhino Rack Sportz Crossbar System you mentioned, # Y05-460 would indeed be able to attach to the hardtop of your Jeep Wrangler Unlimited. My contact at Rhino Rack tells me that the if the installation is properly completed, there should be no leakage through the holes drilled in the top. He went on to say that applying a silicone sealant around the holes would be recommended to further prevent water from getting in. My contact also mentioned that you might want to consider part #...
    view full answer...

  • Ladder Rack Recommendation for a 2014 Dodge Ram 1500 with RamBox
  • I have a solution for you, but since you have the RamBox in the bed of your 2014 Ram 1500 there aren't any ladder racks that will attach to your bed rails. Instead you would want the Rhino Rack T-Load Support Bar and Half Roof rack that consists of the following parts. Rhino-Rack Vortex Aero Crossbar # RRVA150S Rhino-Rack 2500 Series Half Leg Kit # RRRLKVAH Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System # DK043H Rhino-Rack T-Load Hitch Mounted Load Assist...
    view full answer...

  • Replacement Siderails for Access AdaRac Ladder Rack to Install In a 6-1/2 foot Bed 2014 Ford F-150
  • Yes, the side rails are a replacement option on the Adarac ladder rack # A70505. You will need # A70408 (passenger and driver side) as it's the appropriate part to increase to your 6-1/2 foot bed on your 2014 Ford F-150. You will need to order 2 because it's not a set.
    view full answer...

  • Can TracRac TracONE Truck Bed Ladder Rack # TA27000-01 Be Installed Over Plastic Bed Rail Protectors
  • The TracRac TracONE Truck Bed Ladder Rack, part # TA27000-01, can be installed over plastic bed rail protectors. Since this ladder rack system uses C-clamps for installation, no drilling or cutting of your rail protectors is required as long as you have access to the underside of the bed rails (where the clamps will be positioned). I confirmed this with my contact at TracRac. Please refer to the inked video which demonstrates installation in a truck with plastic bed rail protectors....
    view full answer...

  • Recommended Roof Rack to Carry a Canoe on a Camper Shell on a Dodge Ram 1500 Crew Cab
  • For your Dodge Ram with the fiberglass camper shell, I recommend going with a system similar to one that you have referenced but with longer bars. Take a look at # Y02-470. This system has 50 inch long bars and the foot style is different but it would work well to carry a canoe (provided the canoe is under 220 pounds or under the capacity of the camper shell, which ever is lower). You could then use foam blocks, # SR5529, to protect the canoe from the rails. You will also need to make...
    view full answer...

  • Easily Removed Ladder Rack Recommendations for a 2012 Toyota Tacoma
  • The ladder rack you have referenced, # TA37004, is my top choice for a ladder rack that can be easily installed or removed. This rack is listed as a fit for a 2012 Toyota Tacoma. It clamps into place so it is easy to mount and easy to remove. I have included a link to the installation details for you to view. Another option is the TracRac TracONE Truck Bed Ladder Rack, # TA27000-01. This rack also clamps into place but you will also need the TracRac Tacoma mount kit # TA34000, to complete...
    view full answer...











Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com