Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(310 reviews)
Price: $123.69
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $123.69
You Save: $47.72
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (310)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (310 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Drew
9/5/2023
Excellent no issues
by: Matthew 05/09/2024
Fast perfect fit
MADE IN USA
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Jenny N.
3/31/2022
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Jenny N.
9/27/2023
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Jim K.
10/17/2017
Im still very pleased with the product
by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Dennis B.
3/30/2019
Great, finish is durable. Still function properly, did not cause wear on the truck
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Jenny N.
11/25/2022
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Chad07/26/2023
Works perfect for what I needed
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Db
3/20/2015
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
25
310
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Camper Tied Down Set Up For A 2008 Ford F-450 Super DutyThe Brophy Stake Pocket Tie Downs Item # TDSF and the HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles - Qty 4 Item # LC182894 are both compatible with the 2008 Ford F-450 Super Duty. Keep in mind the stake pocket tied down do require drilling to get them installed. You will also need the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 Item # LC182898 to work with the Quick-Load Turnbuckles.
view full answer... - Brophy Tie Downs that Fit 2017 Toyota Tundra Short BedFor a set of bed mounted camper tie downs I recommend the Brophy Stake Pocket Mounted Camper Tie Downs part # HSAB if your truck bed does not have stake pockets. In order to attach your truck bed camper to these tie downs you will also need a set of turnbuckles like the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Recommended Camper Tie Downs for 2014 Ford F-250 With Double Walled Stake PocketI have a solution for you, but you won't be able to use stake pocket mounted tie downs on the 2014 Ford F-250 or F-350 because of the double walled stake pockets. However, you can use clamp on tie downs like the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB, since they don't use the stake pockets at all. I've linked a review video of these for you to check out, but if you wanted to go this route instead of frame mounted they would be the only option.
view full answer... - Brophy Clamp On Camper Tie-Downs Compatibility with Double Wall Truck BedAs long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs # HSSF will work. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't have that lip, they you may want to instead consider the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF which won't utilize that lip or the inside of the bed. Then you can simply use the Brophy...
view full answer...
- Will Stake pocket Mount Camper Tie Downs Fit a 2014 Chevy SilveradoThere are no stake pocket camper tie downs that we carry that will fit your 2014 Chevy Silverado. You would need to use # HSSF with hardware package # TDHP or you could use custom, frame-mounted tie downs. The custom tie downs are going to be the best option since they attach to the truck frame and not just the bed. To view the custom options I would need to know if the truck is a 1500, 2500, or 3500.
view full answer... - Recommended Truck Bed Camper Tie Downs for a 1990 Chevrolet C/K Series Pickup W/2800 Lb CamperI do have a way that will allow you to determine if the Brophy Clamp On Camper Tie-Downs part # HSAB will work for you but I spoke to my contact at Brophy and they do not list a weight capacity for them. As long as you are within the payload rating of your 1990 Chevrolet C/K Series Pickup, your external bed rail width does not exceed 5-1/2", and you have at least 2" of space beneath lip of your bed rail then they will work well for you. According to "Consumer Guides", the payload capacity...
view full answer... - Brophy Stake Pocket Mounted Camper Tie Down Kit TDSF Fit in 1997 Chevy K1500 PickupThe fit of a camper tie-down kit depends on the total configuration of the truck. For your 1997 K1500 pickup the various confirmed fits for camper tie downs depend on the bed length, hitch type and other factors. You can use the linked page to see all kits; use the drop-down Select Vehicle Style menu tool to select your truck configuration (there are a few to select from!). The Brophy Stake Pocket Mounted Camper Tie Down Kit # TDSF offers a cost-effective alternative to these other kits....
view full answer... - Camper Tie Down Recommendation for a 2003 Toyota TundraFor your 2003 Toyota Tundra you would want the Tie-Downs part # TDSF. We had a customer use these on his 2005 Tundra (same generation as yours) and let us know that they worked very well for him. The # HSSF that you referenced is a universal kit that could work for your truck, but we don't have fit information for this kit so your best option would be the # TDSF since we know it would work for you. You also will want the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Will Brophy Stake Pocket Camper Tie Down # TDSF Fit Stake Pockets on 1978 Chevy 1/2 ton K10 8ft bedThe Brophy Stake Pocket Camper Tie Down # TDSF is a near-universal-fit item intended to work on full-size domestic pickups up to and including the 2010 model year. The tie downs have removable spacers that will allow you to get the best fit in your truck stake pockets. The tie-downs are designed to install permanently with included hardware; installation requires some drilling. The linked installation video will illustrate. You may want to consider along with the # TDSF the Brophy # TDHP...
view full answer... - Camper Tie Down Recommendation for 2005 Toyota TacomaFor your 2005 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your truck to provide the attachement point for your camper. It comes with Neoprene pads to protect your truck's paint. I've attached a photo with the dimensions for you to confirm a fit. Another option is to use the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #...
view full answer...
- Bed-Mounted Camper Tie-Downs for 2011 Chevy Silverado Short BedThe Brophy Stake Pocket Mounted Camper Tie-Downs # TDSF feature a shank design that isn't compatible with stake pockets on any truck starting with the 2011 model years. This means it won't be a good option for your 2011 Chevy Silverado. For your truck I instead recommend the Brophy Clamp On Tie-Downs # HSSF. These will simply clamp around the bed's side rails to provide you with 4 sturdy camper tie-downs. These will work great on your Silverado as long as the rails aren't wider than 5-1/2...
view full answer...
- Which Brophy Stake Pocket Mounted Camper Tie Downs for 2003 Dodge Ram PickupThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF are confirmed to fit the 1500 Series 2003 Dodge Ram Pickup. Just place the tie-downs in the stake pockets, drill 2 holes through both the pocket and the tie-down and use the included hardware. Use these with the Brophy Basic Turnbuckles, # TDHP in conjunction with a tie-down. This hardware attaches to the anchors on your camper and to the tie-downs on your truck to keep your camper secure. Please note the linked product review...
view full answer... - Recommended Tie Down Options for a 2006 Dodge Ram 3500The best truck bed camper tie down option we have for you is one that mounts to the vehicle's frame. In order to recommend a frame mounted camper tie down option for you I would need to know the bed size, cab type, whether or not you have step boards and what type of hitch you have installed. Once provided I can then offer you my recommendation. In order to secure your truck bed camper to the frame mounted tie downs, I recommend using the TorkLift Locking FastGun Turnbuckles for Frame-Mounted...
view full answer... - Camper Tie Downs Fits for 2008 Ford F-150 5.5-ft Short BedThe camper tie down kits confirmed to fit your 2008 Ford F-150 short bed can be seen on the linked page by selecting your specific configuration from the drop-down menu tool at the top of the page. The Brophy stake pocket tie downs # TDSF work only with full-size trucks.
view full answer... - Camper Tie Down Recommendation for 2013 RamYes, the stake pocket camper tie downs, # TDSF, will work on the 2013 Dodge Ram, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck. You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets. If your truck campers overall length is longer...
view full answer... - Camper and Tie-Down Recommendation for Ford F250 Super Duty with 6-1/2 Ft BedI spoke with one of our local RV dealers here in Saint Louis and he said that they offer a 6.8 and 8.6 Ft truck camper that would work with your truck. You will need to drop or completely remove your tailgate before hauling this type of camper. When choosing a camper you will also want to make sure that you do not exceed the weight capacity of your truck. When it comes to tie-downs, I personally recommend going with our custom fit TorkLift camper tie-downs like the # TLF2012 and # TLF3006....
view full answer... - Camper Tie Downs for a 2014 Ram 2500 Long BedAccording to Brophy the stake pocket mount tie downs, # TDSF, will not fit 2011 and newer trucks. Tie downs # HSSF are a better option. I have included a link to the installation instructions so you can determine if they would be compatible with your truck since there is no fit guide for these tie downs. But the best option is going to be custom fit tie downs that attach to the frame. I have included a link to the main page for your 2014 Ram 2500. You will need to use the menu to select...
view full answer... - Will Brophy Stake Pocket Tie Downs Fit a 2018 Chevy Silverado 2500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal fit so while we haven't tested it out on a 2018 Chevy Silverado 2500, what I can tell you is that if you check out the dimensions of the stake pocket tie downs (see attached photo) and compare them with your bed rails and plastic liner you'll be able to determine if these will work for your truck or not.
view full answer...
- Camper Tie Downs that Fit 2018 Ram 3500 DuallySince the rear fender flares of a dually are so wide there aren't any bed mounted camper tie downs that will work for your 2018 Ram 3500 but we do have frame mounted options that would work. The frame mounted tie downs provide a much more secure solution so it is the better way to go. So for that you'd want the part numbers # TLD2131 and # TLD3109. The Brophy Camper Scissor Steps - 4 Steps # AS24 that you referenced weighs 28 lbs.
view full answer... - Which Brophy Camper Tie Downs Fit 2011 Chevy Silverado Long BedI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2011 Silverado. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your truck. You'd also need the hardware kit part # TDHP as well and you'd be set.
view full answer... - Truck Bed Camper Tie-Downs for 2007 2500Chev Crew Classic According to my contact at CR Brophy, the # TDSF stake pocket camper tie down isn't compatible with your truck. The # HSSF clamp style tie down will work as long as your truck bed has two inches of available space under the truck bed sidewall as shown in the provided diagram. You'd also need the hardware package, part # TDHP which includes the chains, turnbuckles and hooks to connect the tie-downs and the camper.
view full answer...
- Brophy Stake Pocket Mounted Camper Tie Downs QuantityThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not available in a quantity of two; they are only sold as a quantity of four.
view full answer... - Recommended Camper Tie-Downs For A 1984 Chevy C30 Pick Up Truck Since there aren't confirmed fitting TorkLift Camper Tie-Downs for your 1984 Chevy C30 you'll need to use a clamp-on style like the Brophy Clamp On Camper Tie-Downs # HSAB. You'll need to measure the bedrails to ensure that these tie-downs will fit correctly and not come in contact with the exterior side wall of the bed. I've attached the dimensions of these tie-downs for you below to measure you bed with. If you have stake pockets you could also measure to see if the Brophy Stake Pocket...
view full answer...
- Camper Tie-Downs for a 2013 Ford F-150I personally like the TorkLift Custom Frame-Mounted tie-downs like parts # TLF2014, and # TLF3005 which fit a 2013 Ford F-150 with the 6-1/2' bed and no board or step under the bed. There are variations of this type of kit depending on the configuration for your pickup and they provide you a clean look when you don't have your camper in the bed. For a more cost-effective option you can use a Brophy stake pocket mount like part # TDSF but you need to make sure that the 5-1/2" high x 1-7/8"...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/12/2024
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.