Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
(309 reviews)
Price: $133.49
In Stock
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Item # TDSF
Retail:$171.41
Our Price: $133.49
You Save: $37.92
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (309)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - TDSF
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.
Features:
- Creates attachment points for securing your camper to your truck bed
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Fits tightly into the stake pocket with built-in spacers
- Spacers can be pried off to give you more wiggle room for installation
- Resists corrosion and rust with black powder coated steel
- Mounts permanently in your truck's stake pockets - drilling required
- Locks tie-downs into the truck bed side rails with metal tabs
- Includes 4 camper tie-downs and installation hardware
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above)
- Compatible with drop-in bed liners and side-step beds
- Works with truck bed campers up to 8' long
- Dimensions: see diagrams below
- 1-Year limited warranty
Simple, Secure, and Convenient
Installing these tie-downs is pretty darn simple. They'll just slide into the stake pockets on your truck and you'll drill in some bolts through the pockets and the top of the rail to secure them. They fit snugly and there's no guesswork about where they mount on the rail. Tucked into the stake pockets, they're conveniently out of your way if you want to use your bed for hauling something other than your camper.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper to the tie-downs on your truck to keep your camper secure safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
TDSF CR Brophy Truck Camper Stake Well Tie Downs for Slide In Truck Camper - Bed Mount - 4 Pack
Installation Details
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4 - TDSF
Average Customer Rating: 4.4 out of 5 stars (309 Customer Reviews)
Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.by: Francisco06/30/2023
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show.
for example the truck pockets where these slide into I had too cut the plastic that was covering the holes,
I removed the tail light on one side to get the top bolt screwed in.
I had to remove the gas cap and plastic to secure the top bold.
I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away.
Other then that these mount work great
by: Eric03/03/2024
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
Comments
I agree that it needs to be clearer that the stake pockets work with single walled versus double walled side rails. I am having it added to the tech tips. I will have our Customer Service team reach out to you to discuss returning them.
-- 
Jenny N - 03/12/2024by: Ken05/03/2016
I was hesitant about getting these because I wasn't sure if they would fit. I have a '65 Chevy C-10 and was concerned they would not work because any more, everything is about all the new vehicles on the road, not the oldies. But after consulting with the people at etrailer, I ordered them and couldn't have been happier. I did have to remove the metal tabs (they pry off), but after that, I measured, marked, drilled, and installed the tie-downs in about 20 minutes tops. Loaded the camper and the tie downs worked great. Took it camping 4 times so far and the tie downs are still solid as a rock. Thanks etrailer!
by: Gregory01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
by: Patrick P.07/06/2016
Installed easily. Had to us longer bolts for the back two posts on my 2003 Dodge Ram 2500 4X4 Quad Cab. Also, had to trim some the factory plastic bed liner. No big deal. I took it for a test drive and one of the back brackets seems to twist a bit. I loosed the turnbuckles a little and it is better. I guess I had them too tight. I will be taking the camper on a mini-getaway and will add any new developments. So far, very happy with the product!
by: Drew09/04/2022
Didn't fit my truck. Customer service was greT though in getting me the correct frame mount brackets for tie downs.
Comments
by: John08/20/2023
Not strong enough, on a rough 1 mile dirt road to get into the ranch we stay at, the rocking twisted the Brophys. Had a local Albuquerque trailer dealer install heavier duty frame mounted tie downs.
by: David R03/17/2024
I like the tie dowms,don't have new truck yet to see how they fit.
by: James03/24/2022
Told the would fit my truck but they did not. Thru them in scrap pile
Comments
I see that you had contacted us and advised that you had a 2010 F 150 truck that was built in September of 2010. There are cases where a late in the model year build is actually the next years build which means that the 2010 would have a 2011 frame design. Since these tie downs only fit up to 2010, it would cause a non fit for you. You will want to reach out to Ford to confirm the build design year of your truck.
-- Jenny N - 03/31/2022by: Ryan05/30/2023
Good product. Only problem is with packaging, the painted black parts should be wrapped to prevent chipping which exposes the bare metal. Box contained stacked parts which were banging around in the box resulting in chipped paint...early deterioration potential from rust, and not new appearance.
by: Andrew03/31/2018
After a few slight modifications the brophy camper tie downs worked like a champ!
by: Richard09/25/2023
It bent under load
Comments
I wanted to ask you a few more questions about the tie downs. Do you still have them? How much weight would you estimate your camper weighs? These tie downs are meant to be used for campers up to 8 feet long, including any cab over portion. They are not meant to be used with 2011 and newer trucks.
-- Jenny N - 09/27/2023by: Nate 05/28/2023
product was well built and easy to install. hold Downs feel very solid as installed on the truck. good value for the money.
by: Jim K.10/15/2016
This set of Brophy stake pocket tie downs came with a note in the instructions that they would not work for any vehicle newer than a 2011. My RAM 2500 has the ABS bed caps on the side. I removed them and enlarged the stake pocket holes using the pre-stamped template on the bed caps. Once I reinstalled the bed caps, the camper tie downs dropped into the stake pockets. I had read other reviews that the lag bolts were prone to stripping out. So I drilled 3/8" holes through the bedside and through the camper tie downs. Then I welded a 3/8" nut on the backside of the camper tie downs. Now all is well and secure. I think this is a good product, and I prefer it over the Brophy camper tie downs that clamp to the lip of the bed. I just wish there was a securement method that didn't involve lag bolts.
Comments
Im still very pleased with the product
Jim K - 10/17/2017by: Phill S.08/24/2015
The stake pockets were easy to install with the hardware provided. The dealer I purchased my camper from asked where I had gotten the mounts and I told him about etrailer.com and he was impressed with the mount and tie-down package as an economical package. My only wish was that the powder-coating on the mounts would have been a little nicer, or the packaging a little better. There was a noticeable amount of nicks and scratches in the paint that detract from the appearance. Nothing that affects performance, just cosmetic appeal.
Comments
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
Phill S - 08/31/2016by: Adam08/30/2022
I have a large truck bed camper on my 1991 Dodge W250 that I tried these on. I went this route because I didn't want to spend $2k on Torklift mounts and Fastguns. These came on time and installed super easy, but just had too much flex for me to be comfortable with the size of my load. Ended up going the Torklift route and couldn't be happier. This is a decently made product, just not for me.
by: Trinity11/24/2022
Quality parts, however the mounting holes were not usable. Had to drill new holes in the rear set, also had to use self tapping screws instead of the hardware that was supplied.
Comments
You mentioned that the mounting holes were not usable and I wanted to see if you could explain in more detail what you mean? Would you be able to send pictures?
-- Jenny N - 11/25/2022by: Dennis03/29/2018
Great for use on the 85 Chevy dually. Fit was ok, held the medium four star camper pretty good. Not sure if want them holding a medium or large camper on a newer truck, the thick sheet metal on the old trucks aide the brackets. The brackets themselves are sturdy and I bet would not been before the truck or camper broke in half.
Comments
Great, finish is durable. Still function properly, did not cause wear on the truck
Dennis B - 03/30/2019by: Dave08/24/2022
Stout materials, but they dont fit the stake pocket very well. They are loose in the pocket and are expected to be held in place with a few screws/bolts. Mine tilted to one side when tightening the turnbuckles to hold it in place, and dented the top rail of the bed. Next time I will use a frame mounted system.
by: Michael11/04/2022
They don't seem to be rigid enough. They bent really bad when I was on a rough road. That caused the camper to be loose which wasn't good for my taillights.
by: Howard 08/12/2022
WOW - MUCH better than attaching my big cab-over camper to the bumper with chains in the back and a welded piece of 2X2 square tubing attached to the frame in the front.
Very easy to install - just had to go get a couple drill bits - no big deal. These tie-downs will be much stronger than any S-hooks or turn-buckles could possibly bend.
I did use threaded connecting links rather than S-hooks - I think they will hold better.
by: Joe D06/20/2020
Great product and reasonably priced.
I made a few modifications because I didn’t think they were secure enough on the truck
They are now bolted on in 2 places to ease my mind. Pics attached
by: Chad07/26/2023
Works perfect for what I needed
by: DB03/19/2014
The tie downs arrived quickly and were what I expected them to be with a reasonable price. My only suggestion might be to sell them in pairs instead of 4's. I have an application where I only need 2....Otherwise the etrailer site has worked very well for me.
Comments
Still love etrailer. The tie downs turned to be at the wrong angleposition for my camper so I went another route. But the mistake was mine, so Im keeping them, I have a friend who intends to use them.
DB - 03/20/2015by: Dan P07/24/2022
Received truck stake pocket camper tie downs. Instructions contained information regarding alterations and installation methods. Had all 4 installed and secured within 30 minutes. Look great, and are just what I needed for my camper tie down needs. Thank you.
25
309
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Can I Use the Brophy Clamp On Camper Tie Downs on 2019 Ram 2500 With Double Walled BedAs long as the double wall still allows for the clamp on the underside of your bed rail, the Brophy Tie-Downs # HSSF will work on your 2019 Ram 2500. The brace on the bottom is adjustable so it will account for the additional wall on the inside of the bed. If you don't have the lip under the rail then you may want to instead consider the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # TDSF since they won't utilize that lip or the inside of...
view full answer...
- Brophy Camper Tie Downs 2006 Toyota TundraThe Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options. For your 2006 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP. Each comes with Neoprene pads to protect your truck's paint. Please see the attached photo with the...
view full answer...
- Recommended 2018 Ram 2500 Crew Cab Long Bed Camper Tie DownsI have a good solution but the stake pocket tie downs are for the older trucks and will not work on newer beds. Instead for you 2018 Ram 2500 Longbed with the factory hitch use the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLD2126 and rear part # TLD3109. These are by far the best tie downs on the market as they attache to the frame rather than a point higher on the truck causing it to be more top heavy than need be.
view full answer... - In-bed Camper Tie Down Recommendations for a 2009 Dodge Ram 1500The Extang CargoCleats Truck Bed Tie-Down Anchors - Clamp On - 500 lbs - Qty 2 # EX1932, have a weight capacity of 500 lbs each. You will have to also make sure that the straps that you use also have enough strengths for the application. The tie-downs fit underneath the bed rails like in the video I have linked for you. Provided there is nothing in the way they could fit your 2009 Dodge Ram 1500, they are a universal fit, but will not work if you have the OEM bed rail cap installed. Since...
view full answer... - Camper Tie Down Recommendation for a 1988 Chevy K2500The camper tie downs, # TDSF, will not work with 1988 and newer Chevy/GMC trucks. If your truck is not a step side, does not have a double-wall bed, and is not a dually, you can use # HSSF with hardware package # TDHP. I have included some pictures that show how the tie downs install.
view full answer...
- Recommended Stake Pocket Anchors for a 1996 Ford F-250 For your 1996 Ford F-250, I recommend going with the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF. These are universal anchors that will work with your 96 F-250, can be used in any pocket, and measure 5-1/2" tall x 1-7/8" wide x 3/8" thick. These anchors do require drilling so this is going to be a permanent install, however if you'd prefer a non-permanent install the Brophy Clamp On Camper Tie-Downs # HSSF will work just as good.
view full answer... - Determining Fit of Camper Tie Downs for 2012 Ford F-150 Super Crew CabYou can determine which models of camper tie downs will work on your 2012 F-150 Super Crew Cab by using the link provided. At the top of the page is a drop-down menu where you can select your truck's exact configuration to then see compatible products. Bed length comes into play and the presence of running boards will pose an issue. The Brophy Camper Tie-Downs that you referenced, part # TDSF, fit many domestic pickups that are single wall construction with straight fenders. Check your...
view full answer... - 2004 Ford F150 FX4 6.5 ft bed Camper Tie Down RecommendationWe don't have a lot of specific fit information for the Brophy Tie-Downs part # HSSF that you referenced, but we do know that they can't be installed on a 2004-2008 Ford F-150. The best option I can make for you would be the # TDSF that installs in the stake pockets. You will also want the hardware kit part # TDHP.
view full answer... - Can Brophy Stake Pocket Camper Tie Downs be Removed when Not in Use on a 2013 Ford F-150Since the Brophy stake pocket mount tie downs, # TDSF, bolt into place, you would just need to un-bolt them from the truck to remove them for the season. It would be a good idea to then apply some sort of rust prevention where the hardware for the stake pockets was to prevent corrosion.
view full answer... - Will Brophy Stake Pocket Tie Downs Fit a 2018 Chevy Silverado 2500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal fit so while we haven't tested it out on a 2018 Chevy Silverado 2500, what I can tell you is that if you check out the dimensions of the stake pocket tie downs (see attached photo) and compare them with your bed rails and plastic liner you'll be able to determine if these will work for your truck or not.
view full answer...
- What Tie Down System Will Work for a 7-1/2ft Camper on a 2008 Ford F-150 SuperCab Short BedThe Brophy Tie Down # TDSF will hold your 7-1/2 ft camper on your 2008 Ford F-150 SuperCab Short Bed truck. To complete the installation you also need the Brophy Tie Down Hardware Package # TDHP.
view full answer... - Camper Tie Downs for a 2002 Ford F-250 Super DutyIf your camper is up to 8 feet long I recommend going with the Brophy tie downs you referenced # TDSF. These tie downs fit in the stake pockets of the truck bed with the hook end pointed out of the bed. I have included a link to the installation instructions for you to view. I also recommend adding the camper tie down hardware package # TDHP which has a max capacity of 3,000 pounds. It includes turnbuckles, S-hooks, and chains.
view full answer... - Quantity Of the Brophy Camper Hold Downs Come with the # TDSF # HSSF and # HSABAll of the Brophy Truck Bed Camper Hold Downs like the # TDSF, HSSF, and the HSAB are sold in a quantity of 4.
view full answer... - Will the Brophy Camper Tie Downs # TDSF Fit a 2013 Ford F150The Stake Pocket Mount Camper Tie Downs, # TDSF, are a universal fit item intended to fit as many trucks as possible. But there is no fit guide available stating which trucks are compatible. It is still very likely that they will fit your 2013 Ford F-150. These should clear the sides of your box and eliminate the rubbing you are experiencing. You may also be interested in the Camper Tie Down Hardware Package # TDHP to secure the camper to the tie-downs.
view full answer... - Camper Tie Down Recommendation for 2005 Toyota TacomaFor your 2005 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your truck to provide the attachement point for your camper. It comes with Neoprene pads to protect your truck's paint. I've attached a photo with the dimensions for you to confirm a fit. Another option is to use the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #...
view full answer...
- Recommended Camper Tie-Downs For A 2019 Arctic Fox Model 865 In A 2000 Ford F-250 Super Duty The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are meant for campers only up to 8' so you wouldn't be able to safely tie down your 2019 Arctic Fox Model 865 Truckbed Camper. Instead I recommend the HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971 with the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898. These custom-fit camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions. Low-profile...
view full answer... - Brophy Camper Tie Downs 2015 F-150The Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options, they are mounted onto the bed rails of your truck, no drilling required. For your 2015 Ford F-150 with a pop-up type slide-in type, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP....
view full answer...
- Will Brophy TDSF Camper Tie Down Fit a 2005 Ford F-350 DuallyYes, the # TSDF Brophy camper tie downs are a universal fit for full-size trucks and they will work on a 2005 Ford F-350 dually. The tie downs themselves have no specific weight rating, but the hardware kit for the tie downs, part # TDHP, is rated for campers up to 3000lbs.
view full answer... - Will Brophy Camper Tie Downs, # TDSF Fit a 1994 Ford F-150The Brophy Camper Tie Downs, # TDSF, are a universal application for full-size trucks and they will fit your 1994 Ford F-150. These hold-downs come with hardware to mount them to your truck, but you will also need the Camper Tie Down Hardware Package, # TDHP, for a complete set up.
view full answer... - Which Brophy Stake Pocket Mounted Camper Tie Downs for 2003 Dodge Ram PickupThe Brophy Stake Pocket Mounted Camper Tie Downs, # TDSF are confirmed to fit the 1500 Series 2003 Dodge Ram Pickup. Just place the tie-downs in the stake pockets, drill 2 holes through both the pocket and the tie-down and use the included hardware. Use these with the Brophy Basic Turnbuckles, # TDHP in conjunction with a tie-down. This hardware attaches to the anchors on your camper and to the tie-downs on your truck to keep your camper secure. Please note the linked product review...
view full answer... - Camper Tie Down Recommendation for a 2003 Toyota TundraFor your 2003 Toyota Tundra you would want the Tie-Downs part # TDSF. We had a customer use these on his 2005 Tundra (same generation as yours) and let us know that they worked very well for him. The # HSSF that you referenced is a universal kit that could work for your truck, but we don't have fit information for this kit so your best option would be the # TDSF since we know it would work for you. You also will want the Camper Tie Down Hardware Package, # TDHP.
view full answer... - Brophy Truck Bed Camper Tie Downs for 2009 Ford F-350As long as the underside of the bed rail lip is at least two inches wide (see diagram I've provided for you), the CR Brophy # HSSF camper tie downs are what I'd recommend. You'll also need the tie-down hardware package, part # TDHP which includes the S hooks and turnbuckles. If you click the link, you can see a demonstration video showing how the tie downs work.
view full answer...
- Is the HSSF or the TDSF Slide In Camper Tie Down a Fit for 2012 SilveradoAccording to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you will get a better idea of how the tie downs attach to the top of the bed rail. The tie downs do not have a specified weight rating, but they are more than strong enough to handle any slide-in camper that will physically fit in your truck bed.
view full answer...
- Correct Brophy Truck Bed Camper Tie Downs for a 2002 Dodge Ram 2500The correct Brophy Truck Bed Camper Tie Downs for a 2022 Dodge Ram 2500 is part # TDSF. Then for the turnbuckles you can use the Brophy Basic Turnbuckles part # TDHP. This is a complete, cost effective setup for securing a truck bed camper. The listed two you mentioned are not compatible.
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Amanda K
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Amber S
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.