Customers compare EM09160 to these similar products
Products Featured in this Video
Hey everybody, I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the Erickson tie-down kit for your wheeled vehicle, so if you're using an ATV, UTV, lawn mower, golf cart, or anything else, this is gonna be a nice kit to make sure that vehicle is secure, and safe inside your trailer. I like this because it's gonna give you really high visibility on these chocks, so… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Erickson has the spacing for the mounting holes of the #EM09160 before and after the chock at approximately 4-3/8" center to center. Since they unfortunately do not offer a custom backing plate the #e96RR you purchased is going to be the closest…
view full answer...The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…
view full answer...Increasing your wheel size one inch is typically not an issue, so you likely will be able to use a wheel like the Aluminum Viking Series Valhalla Trailer Wheel - 13" x 5" - 5 on 4-1/2 - Silver Spoke #AX02350545BMFL you asked from. If you…
view full answer...The Erickson ATV E-Track Tie-Down Kit #EM09160 is intended to secure your trailered 4-wheeled vehicle at the rear tires. The chocks are to be mounted in front of and behind the rear wheels as shown in the linked video and photo. If they were…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...To add a receiver hitch for a bike rack you'll actually connect the hitch to frame of your RV and not use the bumper as most aren't rated to hold the weight of a bike rack and bikes. You'll need to measure from beam to beam to see what…
view full answer...The installation method you mention for the #EM09160 Erickson ATV E-Track Tie-Down Kit should be sufficient to hold down your 800 lb ATV, but I'd personally feel better if you could tie in to a metal crossmember under the trailer decking or use a…
view full answer...Sounds like you are looking for something like the Erickson Adjustable Wheel Net part #77314 which attaches to a section of E-track and holds a vehicle wheel securely. This is pretty similar to the Pack Em #PK-WTD that you referenced as well.
view full answer...It would take an incredibly hard braking situation to lift the rear wheels of a UTV if only the front wheels of it were secured with the Tie Down Kit part #EM09160. Essentially it would only happen if you were in an accident. That being said it is…
view full answer...If you wanted to use two sets of the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 to secure all 4 wheels of your ATV you certainly could. I would recommend attaching the chocks to the frame of the trailer and not the…
view full answer...If you used the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 on all 4 wheels of your UTV you'd have more than enough capacity for your 1,700 lb Kawasaki Tyrex 4 LE. I attached an install video for this for you to…
view full answer...Grade 5 or higher would work well for mounting the Erickson ATV E-Track Tie-Down Kit #EM09160 to your trailer floor. I would go with carriage style bolts.
view full answer...