Customers compare SW1475201 to these similar products
Products Featured in this Video
Today we're going to take a look at the Superwinch S7500 SR Winch. It has a synthetic rope, a roller hawse fairlead, and a 7,500 pound weight capacity. Now this Superwinch trailer winch will pull 7,500 pounds with a 3.6 horsepower permanent magnet motor that's driven through an all steel, three stage planetary gear box at 26 feet per minute. It has a nice custom aluminum housing which is light and… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...The weight is 54 lbs for the Superwinch S7500 Trailer Winch #SW1475201.
view full answer...The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…
view full answer...It is plastic. The ComeUp UW-5000si Trailer Winch item #CU645010 is a light duty winch so it's housing and base are made of plastic. I attached a picture below that will show you the base. I've also linked an installation video that will go…
view full answer...The picture for determining bolt pattern is actually a little easier than maybe it seems. You just need to measure across the wheel like it shows and then count the amount of lug holes and that's all you need. So if it's 5 inches and its a 5…
view full answer...The Bulldog Winch part #BDW15020 would be a great option for your setup. This is a 4,400 lb 12 volt winch which uses a synthetic rope instead of a steel cable. It powers in and out and has a built in brake as well. The winch also moves at 19 feet per…
view full answer...For a shut off switch with the Bulldog Winch part #BDW10030 I'd recommend the switch part #BDW20248 which is rated for 500 amps and is very easy to use. This is a cheap insurance policy for your winch wiring so it would be a really great…
view full answer...For the Curt winch mount, #C31010, or any of the similar mounts, you will need to compare the mounting pattern on the mount to what your winch requires. I have included 2 pictures. One shows the mount pattern of the Curt mount.
view full answer...Typically, we want a winch that will be used to load a car trailer to have a line pull capacity at least 50% greater than its. gross vehicle weight With that in mind, my recommendation is the Bulldog Winch Trailer Winch - Synthetic Rope - Hawse…
view full answer...For mounting a winch to a trailer like the Superwinch #SW1455201 one solution is to weld a hitch tube to the trailer like with the part #E-9 so that you could use a winch mounting plate like the #BDW20011 and have a way to easily remove and reinstall…
view full answer...Yes, the Superwinch Tiger Shark Series Off-Road Winch #SW1511200 that you referenced will fit the Curt Winch Mount part #C31010 that you also referenced. The winch has more capacity than the mount so you would have to stay under the 9k rating of the…
view full answer...I can understand why this might be confusing, when it comes to the different ratings. Rolling capacity is essentially just the capacity of the winch to pull a load that is moving up an incline; technically the capacity that is listed is the maximum…
view full answer...