Jeep Windows Specs:
Features:
Tinted window kit replaces the rear and 2 side windows on your vehicle's Bestop Supertop NX or Replace-A-Top. Heavy-duty molded zippers allow for simple installation. 31-Percent tint shields you from sunlight and keeps you cool in your cab.
Installation Notes:
Includes tinted side and rear windows
Tech Tip:
Fits Supertop NX Black Twill B54823
More Information >Jeep Windows Specs:
Features:
Tinted window kit replaces the rear window and 2 side windows on your vehicle's Bestop Trektop NX soft top. Heavy-duty molded zippers allow for simple installation. 31-Percent tint shields you from sunlight and keeps you cool in your cab.
Installation Notes:
Includes tinted side and rear windows
Tech Tip:
Fits Trektop NX Black Twill B56923
More Information >Jeep Windows Specs:
Features:
Tinted window kit replaces the rear window and 2 side windows on your vehicle's Bestop Trektop NX soft top. Heavy-duty molded zippers allow for simple installation. 31-Percent tint shields you from sunlight and keeps you cool in your cab.
Installation Notes:
Includes tinted side and rear windows
Tech Tip:
Fits Trektop NX B56823
More Information >Jeep Windows Specs:
Features:
Spice up your Sailcloth soft top in seconds with the Bestop Tinted Window Kit. Side and rear windows install easily with zippers to keep you looking cool - and feeling cool, too. Windows are 31-percent tint for maximum protection from sunlight.
Installation Notes:
Includes tinted side and rear windows
Tech Tip:
Fits Sailcloth Replace-A-Top B79137 and factory tops.
More Information >Jeep Windows Specs:
Features:
Get a little extra protection for yourself and your vehicle's cab with this single-piece panel that installs behind your front or rear seats. Reduces drafts and wind noise while you drive. Built-in window provides visibility.
More Information >Videos
for Jeep Windows
Help Articles
for Jeep Windows
Expert Answers
for Jeep Windows
Yes, we do offer the part #STL264RCB that you referenced which is basically just the all clear lens version of the part #STL264RB.
view full answer...We have the Classic Accessories Toy Hauler Screen #052963799842 that is designed to fit toy haulers. It is 98-1/2" wide x 90-1/2" tall. You could trim it to fit your 80"x80" opening or you could roll up the…
view full answer...The Bauer Products Motorhome Door Lock, #BA64FR fits doors that are 1-1/4" to 1-1/2" thick and requires a cutout dimension of 5-1/4" wide x 4-1/2" tall. Based on the measurements you provided and the attached…
view full answer...The Camco RV and Marine Premium Water Filter, part #CAM40631, uses a standard garden hose connection of 1/2" inner diameter and 1" fitting. If the 1/2" input and output connection types you have are male then you…
view full answer...We haven't heard from anyone with your specific trailer, but you can compare the dimensions of the #T55B to your trailer to see if it would fit or not. You would be able to take the dimensions in the picture I attached and compare them to the…
view full answer...My TruXedo representative confirms that the #TX22AR Stake Pocket Covers are indeed compatible with the factory installed black plastic covers on the tops of the bed sides.
view full answer...For e-bikes with the lower top tubes the solution I recommend is a rack like the Hollywood Racks RV Rider part #HLY64FR as it uses a pivoting clamp that can do a better job grabbing onto the frame of the bike than racks like the E-Spec which use a…
view full answer...Yes! I can definitely point you in the right direction. Since your Trek Verve bikes have either a cargo platform and fenders on both bikes, I strongly recommend going with a frame-mounted style. This is because using a wheel-mount style with fenders…
view full answer...The Saris Freedom Bike Rack #SA4412B will technically fit on a motorhome, it's just that with motorhomes there is more movement at the hitch receiver and Saris hasn't approved this rack as able to handle that extra movement - so you can use…
view full answer...The Saris SuperClamp EX #SA4025F transports bikes (up to 60 lbs) with dual wheel-clamping hooks as well as front and rear wheel straps for a super secure connection. As long as you can really get the front wheel clamped down well you can just do the…
view full answer...I would look into the Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #SA4412B. This has a weight capacity of 60lbs per bike and is a highly recommended bike rack for electric bikes. This should clear your spare…
view full answer...The Swagman Chinook #S64683 is a great bike rack that can be adjusted to hold kid's bikes so I don't think that the hook being able to come down far enough will be an issue. My only concern is that the 3rd point of contact will be lower so I…
view full answer...