Hello David, You are correct (3 words everyone likes to hear) the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56367 will only work with the wagon. For your 2017 Subaru Impreza Sedan you will want the Curt T-Connector…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…
While the Titan Chain Cable Snow Tire Chains #TC1034 'technically' don't need chain adjusters or separate tensioners, I highly recommend them. Especially since they don't have a self-tensioning system like the Konig CG9 #TH00023100 or…
When you go to remove the rear fascia on your 2022 Subaru Impreza Hatchback to install the EcoHitch Hidden Trailer Hitch Receiver #306-X7350, there will be an additional wire connection you need to unclip for the rear sensors in the fascia. You will…
Yes, there is a hitch for your 2023 Subaru Impreza 5-Door Wagon. It is the Curt Trailer Hitch item #C11465. This hitch is custom fit and bolts to your Impreza with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000…
The EcoHitch Hidden Trailer Hitch item #306-X7350 you were looking at is confirmed to fit your 2018 Subaru Impreza. It bolts to your Subaru with included hardware. I really like this hitch because it installs behind your rear bumper cover leaving…
Yes, there is a hitch that is confirmed to fit your 2023 Subaru Impreza 5-door Wagon. - Curt Trailer Hitch Receiver #C11465 This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 1-1/4" hitch receiver…
The EcoHitch Hidden Trailer Hitch #306-X7350 weighs 36 lbs. It features a bolt-on installation, alloy construction, and a limited lifetime warranty. If you plan on towing you will also need the #C56367 for wiring. This plugs into the connection…
Nope, it sure won't; we have a hitch and wiring harness that fits your 2022 Subaru Impreza but nothing from a 2010 Outback will fit. There is only one 2 inch hitch for your Impreza, otherwise you'd need a Class I, 1-1/4 inch hitch, so…
The Board Locker #INA744 is going to be a bit taller of a carrier compared to the Inno Locker #INA446. Both are going to wrap around your crossbars and work with whatever roof rack you may have, the mechanism is the same thing. You're right…
In order to use the Inno Board Locker Surfboard Carrier part #INA744 on your Jeep Patriot with raised side rails you would need a set of crossbars. Unfortunately, none of our watersport carriers are designed to attach directly to the raised side…
