Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…
When it comes to a kayak carrier, I personally like the Rhino-Rack Nautic Roof Kayak Carrier w/ Tie-Downs, #RR571. This carrier allows one person to easily load a kayak from the rear of the vehicle. If at some point you plan on carrying more than…
After reaching out to Curt on your behalf, I've been told that both the Curt #C66KR and the #C13416 are expected to fit all sub-models. I've included an installation video on a 2020 Toyota Rav4 that should help you with the install.
The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…
The Curt Wiring Harness #C56434 is confirmed to fit all models of the 2021 Toyota RAV4. Your RAV4 Prime does fall into that fit. This will give you a 4-way flat connector for towing small trailers or using Auxiliary Lights #C53201 with your hitch…
I sure can Mike! I saw you were looking at the Universal Installation Kit for Trailer Brake Controller item #ETBC7. This is one of the most important parts you'll need. It's going to add a 7-way connector and all necessary wiring to your…
The Curt Hitch part #C13416 is the best hitch for your 2021 Toyota RAV4 Prime as it's got the best capacities, is mostly hidden, installs relatively easy, and among other hitch manufacturers has the best quality control and powder coat…
I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…
Since your 2021 Toyota Rav4 Prime has a factory 4-way all you need to convert it to a 7-way and install the Curt Echo Mobile brake controller part #C51180 is the part #ETBC7L which comes everything needed. This would be same solution you'd need…
We have one box that fits the Malone Microsport trailers with the part #MPG481 which installs below the bars of the rack. I attached a review video and picture for you to check out as well.
The Storage Trunk #MPG481 will not work with the LowBed MicroSport #MAL25FR as the bunks sit too low on the trailer. Instead you will want the Malone MicroSport Trailer #MPG461B2 or if you already have the LowBed you can use the Crossbar Conversion…
Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…
