Custom Fit 2021 Kia Sorento Accessories

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

The 13 cu ft Inno Wedge Plus Rooftop Cargo Box #INBRM864MBK overhangs the forwardmost crossbar by about 19" (see attached) - I confirmed this with my contact at Inno.

For your 2021 Kia Sorento SX without the factory tow package you will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK26FR which is confirmed to fit all models of the Sorento including your SX model. At this time…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

When it comes to installing a trailer hitch onto your brand new 2023 Kia Sorento X-Line The etrailer brand #e28AR Class III hitch is a confirmed fit for the X-Line trim. Out of the hitches that are available for your vehicle Sorento I like the…

There is; the correct wiring harness for your 2021 Kia Sorento SX Prestige with the factory tow package is from Curt, and is the following part number: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR

According to Küat, as long as the bike in question weighs 45 lbs or less, the #TDKB Trail Doc will work just fine. I've confirmed this with Küat.

Yes, the Tekonsha 4-pole wiring harness item #TK26FR is compatible with your 2021 Kia Sorento. The harness connects behind the rear tail lights of your vehicle by removing a plug on either side and inserting the wiring harness between the connectors.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For a wiring harness that fits your 2022 Kia Sorento SX without the factory tow package I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK26FR. When compared to others, we have found Tekonsha to be the most reliable…

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…