I do have options for your 2019 Kia Sorento that will aid in both sway control and vehicle sag but I unfortunately do not have the answer you are looking for as to why the trailer hitch receivers they offer for your vehicle are not rated for use with…
For your 2018 Kia Sorento without the factory tow package I recommend the Tekonsha kit part #118583 as it is a confirmed fit and because this brand of trailer wiring is the most reliable for us. I attached an install video for this kit on a similar…
Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…
Both the Tekonsha T-One Vehicle Wiring Harness #118781 and the Curt #C56382 T-Connector are custom harnesses designed specifically for your 2020 Odyssey, and will plug into the same factory port behind the driver side trim panel. In terms of function…
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
Aside from contacting your local Kia dealer with the VIN for your 2018 Kia Sorento the easiest way to determine if you have the factory tow package or not is to simply go to the rear driver's side of your vehicle and locate the OEM wiring…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Actually the EcoHitch part #306-X7320 only excludes the SX models of the 2019 Kia Sorento and not the SXL model that you have so it would work great for you.
The Fusion LED Trailer Tail Light #STL211RCB is a recessed light that is nearly identical to the GloLight LED Trailer Tail Light #STL1211RCFHPG. With the recessed light #STL211RCB you will need the PVC Grommet #a70gb to fit the recessed hole or…
The main difference between the Fusion LED Trailer Tail Light part #STL211XRFHB and the Fusion LED Trailer Tail Light part #OPT37FR is that the stop/turn signal portion of the former is a red lens with red LEDs and the latter is a white lens with red…
Yes, the Reflex Reflector Flange Cover part #A211RXB that you referenced does fit the GloLight LED trailer tail light part #STL1211RCFHPG that you also mentioned.
Do you mean it has two white wires in addition to the power wires for the turn/brake and running lamp circuit? If so you can simply attach the ground wire for the #STL211XRFHB lamp to both white ground wires on the trailer. This assumes they're…
